Optimization of cutting speed and clearance angle in the disc chipper

被引：0
|
作者：
Reczulski M. [1 ]
机构：
[1] Lodz University of Technology, Centre of Papermaking and, Printing 223 Wólczańska St., Lodz
来源：
Wood Research | 2021年 / 65卷 / 06期
关键词：
Chip formation; Clearance angle; Cutting speed; Disc chipper; Wood chipping;
D O I：
10.37763/WR.1336-4561/65.6.951962
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The wood chipping system in a disc chipper Carthage-Norman was studied. The study showed many operational problems related to obtaining chips of different length in the process of wood chipping. Excessive amount of fines and pin fractions were produced in the chipper. The reason for this was the too high cutting speed of the logs and the wrong clearance angle in the chipper. The actual and optimal distribution of the cutting velocity occurring on the chipper knife was determined using the Matlab/Simulink model. In addition, optimal clearance angles in the chipper were determined using the model. © 2020 Statny Drevarsky Vyskumny Ustav. All rights reserved.
引用
收藏
页码：951 / 962
页数：11
相关论文
共 50 条
  • [1] OPTIMIZATION OF CUTTING SPEED AND CLEARANCE ANGLE IN THE DISC CHIPPER
    Reczulski, Mariusz
    WOOD RESEARCH, 2020, 65 (06) : 951 - 962
  • [2] OPTIMIZATION OF THE CLEARANCE ANGLE IN INDUSTRIAL DISC CHIPPER
    Reczulski, Mariusz
    WOOD RESEARCH, 2018, 63 (02) : 295 - 304
  • [3] A dynamic measurement of a disc chipper cutting forces
    Georges, Remi
    Auchet, Sebastien
    Meausoone, Pierre Jean
    BIOMASS & BIOENERGY, 2014, 64 : 269 - 275
  • [4] Clearance angle and evolution of depth of cut in actuated disc cutting
    Dehkhoda, Sevda
    Hill, Bryce
    JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, 2019, 11 (03) : 644 - 658
  • [5] Clearance angle and evolution of depth of cut in actuated disc cutting
    Sevda Dehkhoda
    Bryce Hill
    Journal of Rock Mechanics and Geotechnical Engineering, 2019, 11 (03) : 644 - 658
  • [6] Effect of anvil position on cutting force and energy measurements of a disc chipper
    Labbe, Stephane
    Auchet, Sebastien
    Meausoone, Pierre-Jean
    BIOMASS & BIOENERGY, 2017, 99 : 49 - 56
  • [7] Influence of Disc Chipper Characteristics on Chip Quality
    Vasiljev, S. B.
    Simonova, I. V.
    LESNOY ZHURNAL-FORESTRY JOURNAL, 2007, (06) : 75 - 78
  • [8] Effect of the Cutting Speed on the Surface Quality of Black Spruce Cants Produced by a Chipper-Canter
    Hernandez, Roger E.
    Kuljich, Svetka
    Naffeti, Oussema
    Koubaa, Ahmed
    FOREST PRODUCTS JOURNAL, 2013, 63 (1-2) : 39 - 46
  • [9] Particle size distribution of Japanese cedar chip converted from boards using a disc chipper and its relationships with disc rotation speed and board feed speed
    Matsuda, Yosuke
    Matsumura, Yukari
    Yanagida, Takashi
    Fujimoto, Kiyohiko
    JOURNAL OF WOOD SCIENCE, 2025, 71 (01)
  • [10] Selection of cutting speed in broaching of gas turbine disc
    Pavic, A
    Sutic, Z
    CIM '97 - COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING, 1997, : B105 - B114
12345