Setting optimization schemes of a gas pipeline compressor plant

被引:0
|
作者
Dong P. [1 ]
Liu S. [1 ]
An Y. [1 ]
Wu F. [1 ]
Huang L. [2 ]
机构
[1] China Petroleum Pipeline Engineering Corporation, Langfang, 065000, Hebei
[2] Changchun Oil & Gas Transportation Sub-Company, PetroChina Pipeline Co., Ltd., Changchun, 130000, Jilin
来源
Natural Gas Industry | 2019年 / 39卷 / 10期
关键词
Compressor plant; ESD system; Failure; Fire; Gas compressor station; Independent plant; Joint plant; Risk assessment;
D O I
10.3787/j.issn.1000-0976.2019.10.013
中图分类号
学科分类号
摘要
Gas pipeline compressor plants are set mainly in two forms, i.e., independent plants and joint plants. The former is safe and flexible, but covers a large area and needs high investment, while the latter covers a small area and requires low investment, but its safety and flexibility is poor. Facing the ever-increasing safety and environmental protection requirements and increasingly shortage of land, the setting form of a newly built gas pipeline compressor plant has attracted much attention and controversy. In this paper, the setting requirements of compressor plants stipulated in the standards and specifications of North America, the former Soviet Union, Europe, and China were studied systematically, and the actual setting approaches adopted in several domestic and foreign famous pipeline projects were investigated. Then, based on the actual engineering, quantitative risk analysis and economic evaluation were carried out on the two schemes of independent plants and joint plants by means of a specialized software. And the following research results were obtained. First, there is no clear requirements on the setting form of compressor plants in domestic and foreign main design specifications. Second, in Canada and the former Soviet Union, independent plants are widely applied. In the United States and Europe, both independent and joint plants are commonly applied. And in domestic market, joint plants are usually applied. Third, from the safety perspective of stations and gas pipeline systems, independent plants are superior to joint plants. From the economic perspective, joint plants are much better. Fourth, if both schemes are compared from the aspect of land acquisition, taking 4 compressor sets as an example, an independent plant scheme requires about 3 600 m2 more land, in this way a joint plant scheme seems more dominate. However, if in the construction of gas compressor stations of long-distance pipeline with much more land easier to occupy, an independent plant scheme should be recommended. © 2019, Natural Gas Industry Journal Agency. All right reserved.
引用
收藏
页码:103 / 109
页数:6
相关论文
共 26 条
  • [21] Fan Y., Rong L., Li S., Li L., Sun D., Tian T., Numerical simulation of combustible gas leakage and diffusion in compressor workshop, Chemical Engineering of Oil & Gas, 47, 1, pp. 115-120, (2018)
  • [22] Wang H., Shi W., Lai P., Decomposition of quantitative individual risk tolerable criteria and its application to natural gas compression stations, Natural Gas Industry, 36, 5, pp. 163-167, (2016)
  • [23] Pan H., Research on the application of safety instrument system in natural gas pipeline compressor station, Petrochemical Industry Technology, 5, (2009)
  • [24] Wang J., Application of ESD system in natural gas pipeline, Automation Panorama, 7, pp. 36-38, (2008)
  • [25] Xie Q., Research on the failure mode of transmission system, Contemporary Chemical Industry, 44, 7, pp. 1711-1714, (2015)
  • [26] Li X., Failure problems of compressor stations in Sichuan- East gas pipeline based on SPS simulation, Pipeline Technique and Equipment, 3, pp. 11-13, (2017)