Simulating the process of aluminum alloy ingots crystallization in semi-continuous casting

被引：0

作者：

Bezrukikh, A. I. ^{[1
]}

Konstantinov, I. L. ^{[1
]}

Grishko, G. S. ^{[1
]}

Golvenko, E. A. ^{[1
]}

Sidelnikov, S. B. ^{[1
]}

Iliin, A. A. ^{[1
]}

Yuryev, P. O. ^{[1
]}

Mansurov, Yu. N. ^{[2
,3
]}

Baykovskiy, Yu. V. ^{[1
]}

机构：

[1] Siberian Fed Univ, Krasnoyarsk, Russia

[2] Tashkent State Transport Univ, Tashkent, Uzbekistan

[3] Huanggang Normal Univ, Huanggang, Hubei, Peoples R China

来源：

METALLURGIST | 2024年 / 67卷 / 11-12期

关键词：

Simulation; Verification; Aluminum alloys; Semi-continuous casting; Scandium; Aluminum-magnesium alloys; 669.19; 669.04; PRODUCTS;

D O I：

10.1007/s11015-024-01676-8

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The ProCAST software package was used to simulate the crystallization of a slab ingot on an installation for semi-continuous casting of aluminum alloys, which made it possible to determine the distribution of temperature, solid phase volume and melt flow velocities during the crystallization of slab ingots with a cross section of 200 x 60 mm at various casting parameters. Verification of the model was carried out on a physical model of the installation, which represents a model of an industrial casting unit for semi-continuous casting. 1580 aluminum-magnesium alloy was used as a simulation object. In the ingot obtained by physical simulation carried out according to computer simulation modes, no surface or internal defects were detected, and the hydrogen concentration in it was 0.17 cm3/100 g, which meets the requirements of regulatory documents.

引用

页码：1791 / 1801

页数：11

共 50 条

[31] Research on cast and reheated microstructures of 6061 alloy by electromagnetic semi-continuous casting
Wang, Ping
Li, Xiao-Feng
Wei, Chun-Ying
Cui, Jian-Zhong
Dongbei Daxue Xuebao/Journal of Northeastern University, 2011, 32 (08): : 1149 - 1152
[32] Thermal stability of Al/AlSi gradient alloy prepared by semi-continuous casting
Rejiagong Gongyi, 3 (9-11):
[33] Interface Formation and Characterization of Brass/Aluminum Compounds Fabricated Through Die Casting and Semi-Continuous Casting
Thomas Greß
Vanessa Glück Nardi
Tim Mittler
Simon Schmid
Paul Buchberger
Babette Tonn
Wolfram Volk
International Journal of Metalcasting, 2020, 14 : 564 - 579
[34] CONTINUOUS AND SEMI-CONTINUOUS CASTING OF COPPER ALLOY BILLETS AND ROLLING SLABS - A REVIEW OF CURRENT PRACTICE
BAILEY, GL
MANTLE, EC
JOURNAL OF THE INSTITUTE OF METALS, 1963, 91 (12): : 385 - &
[35] Interface Formation and Characterization of Brass/Aluminum Compounds Fabricated Through Die Casting and Semi-Continuous Casting
Gress, Thomas
Mittler, Tim
Schmid, Simon
Buchberger, Paul
Volk, Wolfram
Nardi, Vanessa Glueck
Tonn, Babette
INTERNATIONAL JOURNAL OF METALCASTING, 2020, 14 (02) : 564 - 579
[36] Facility for Semi-continuous Casting of Pipe.
Zmuda, Andrzej
Giessereitechnik, 1980, 26 (11): : 332 - 337
[37] Torslab - a new concept in semi-continuous casting
O'Rourke, Anthony
Steel Times, 1996, 224 (07):
[38] EXPERIMENTS ON THE SEMI-CONTINUOUS CASTING OF BRONZE - REPLY
ELLWOOD, EC
PRYTHERCH, JC
PHELPS, EF
JOURNAL OF THE INSTITUTE OF METALS, 1956, 84 (13): : 523 - 523
[39] A Simplified Model for Semi-continuous Casting of Steel
Kim, Hee-Soo
Kim, Ji-Joon
Oh, Kyung-Shik
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (09) : 4064 - 4070
[40] Semi-continuous casting as alternative to special steels
Zajber, Adolf Gustav
Stahl und Eisen, 2016, 136 (10): : 62 - 65

← 1 2 3 4 5 →