Effect of Spinel-Coated Aggregates on Thermal Shock Resistance and Cement Clinker Corrosion Resistance of Magnesia Spinel Refractories

被引：0

作者：

Zhu F. ^{[1
]}

Dai Y. ^{[1
]}

Yan W. ^{[1
]}

Xu Y. ^{[1
]}

Wang D. ^{[1
]}

Wang C. ^{[1
]}

机构：

[1] Wuhan University of Science and Technology, The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, National-provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology, Wuha

来源：

Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society | 2023年 / 51卷 / 03期

关键词：

coating structured aggregates; corrosion/penetration resistance; magnesia–alumina spinel refractories; nondestructive testing methods; thermal shock stability;

D O I：

10.14062/j.issn.0454-5648.20220822

中图分类号：

学科分类号：

摘要：

Cement rotary kilns using refractories require excellent refractoriness, thermal shock stability and corrosion resistance due to the cyclic rotation and feeding–discharging of cement clinker. In this paper, a kind of magnesia–alumina spinel refractory containing coating structured aggregates were prepared by wrapping spinel fines on the surface of magnesia aggregates. The fracture behavior and corrosion resistance of prepared refractories were characterized by three-point bending test combined with digital image correlation, acoustic emission technique, and static slag resistance method. The results indicate that by changing the distribution of spinel to make coating structure aggregates, the alumina content is effectively reduced while a more uniform and extensive distribution of spinel phase is achieved. Compared with the merchant magnesia–alumina spinel refractory (10% Al2O3) with pre-synthetic spinel aggregates, the magnesia–alumina spinel refractory (5% Al2O3) with spinel coating aggregates has the improved mechanical strength and corrosion resistance, and maintains the thermal shock resistance. © 2023 Chinese Ceramic Society. All rights reserved.

引用

页码：658 / 668

页数：10

共 25 条

[21] DAI Yajie, LI Yawei, JIN Shengli, J Chin Ceram Soc, 47, 8, pp. 1089-1094, (2019)
[22] AKSEL C, WARREN P D., Thermal shock parameters [R,R’and R’’] of magnesia–spinel composites[J], J Eur Ceram Soc, 23, 2, pp. 301-308, (2003)
[23] GRASSET-BOURDEL R, ALZINA A, HUGER M, Et al., Influence of thermal damage occurrence at microstructural scale on the thermomechanical behaviour of magnesia–spinel refractories[J], J Eur Ceram Soc, 32, 5, pp. 989-999, (2012)
[24] PENG W, CHEN Z, YAN W, Et al., Advanced lightweight periclase–magnesium aluminate spinel refractories with high mechanical properties and high corrosion resistance[J], Constr Build Mater, 291, 1383, pp. 123-388, (2021)
[25] WU G, YAN W, SCHAFFONER S, Et al., Effect of magnesium aluminate spinel content of porous aggregates on cement clinker corrosion and adherence properties of lightweight periclase–spinel refractories[J], Constr Build Mater, 185, OCT.10, pp. 102-109, (2018)

← 1 2 3 →