Asymmetry of Tension-Compression Performances and Strain Rate Sensitivity of TA2

被引:0
|
作者
Tao, Jiahui [1 ]
Gu, Boqin [1 ]
Chen, Lili [1 ]
Zhou, Jianfeng [1 ]
机构
[1] School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing,211800, China
关键词
Titanium - Deformation - Twinning - Microstructure - Strain hardening;
D O I
暂无
中图分类号
学科分类号
摘要
The behavior of commercially pure titanium (TA2) under tension and compression was investigated at different strain rates. Significant tension-compression asymmetry in yielding and strain hardening were observed. The results show that with the increase of deformation strain rate, the asymmetry of TA2 increases. The microscopic deformation mechanisms and microstructure evolutions of commercially pure titanium under tension and compression were analyzed by electron backscattered diffraction (EBSD) techniques. The results show that the compressive deformation of commercially pure titanium is dominated by deformation twinning while the tensile deformation is dominated by the dislocations sliding. The macroscopic tension-compression asymmetry of commercially pure titanium is determined by load sensitivity of microscopic deformation behaviors and its strain rate sensitivity is due to the different influences of strain rate on properties of tension and compression. © 2019, Science Press. All right reserved.
引用
收藏
页码:3571 / 3576
相关论文
共 50 条
  • [41] On tension-compression asymmetry in ultrafine-grained and nanocrystalline metals
    Guerses, Ercan
    El Sayed, Tamer
    COMPUTATIONAL MATERIALS SCIENCE, 2010, 50 (02) : 639 - 644
  • [42] TENSION-COMPRESSION ASYMMETRY OF SOLID, SHAPE RECOVERED "BULK" NITINOL
    Fonte, Matthew
    Saigal, Anil
    IMECE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 14, 2010, : 225 - 226
  • [43] On the impact of modelling tension-compression asymmetry on earing and thickness predictions
    Barros, P. D.
    Oliveira, M. C.
    Alves, J. L.
    Menezes, L. F.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2019, 5 (03) : 445 - 460
  • [44] Tension-Compression Asymmetry Under Superplastic Flow in Magnesium Alloys
    Hiroyuki Watanabe
    Masao Fukusumi
    Journal of Materials Engineering and Performance, 2014, 23 : 3551 - 3557
  • [45] Strain rate-dependent tension-compression asymmetry in cast Mg-Gd-Y alloy: Insights into slip and twinning mechanisms
    Li, Jingli
    Chen, Huicong
    Wu, Di
    Chen, Rongshi
    Song, Jun
    Yi, Xin
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2025, 219 : 134 - 146
  • [46] Strain Rate Sensitivity of Commercially Pure Titanium TA2 at Room Temperature and Revising of Hollomon Empirical Formula
    Peng Jian
    Zhou Changyu
    Dai Qiao
    He Xiaohua
    Tang Zhixiang
    Du Yongqin
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (03) : 483 - 487
  • [47] Strain rate sensitivity of commercially pure titanium TA2 at room temperature and revising of Hollomon empirical formula
    Peng, Jian
    Zhou, Changyu
    Dai, Qiao
    He, Xiaohua
    Tang, Zhixiang
    Du, Yongqin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2013, 42 (03): : 483 - 487
  • [48] Tension-compression asymmetry at finite strains: A theoretical model and exact solutions
    Du, Zongliang
    Zhang, Gang
    Guo, Tianfu
    Tang, Shan
    Guo, Xu
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2020, 143 (143)
  • [49] Generalization of Hill's yield criterion to tension-compression asymmetry materials
    CHEN Lei
    WEN WeiDong
    CUI HaiTao
    Science China Technological Sciences, 2013, (01) : 89 - 97
  • [50] Investigation of tension-compression asymmetry of magnesium by use of the acoustic emission technique
    Mathis, Kristian
    Capek, Jan
    Zdrazilova, Zuzana
    Trojanova, Zuzanka
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (18): : 5904 - 5907