Study on thermo-electrical characteristics of natural oils

被引：1
|
作者：
Arun V. [1 ]
Kumar N.M.G. [1 ]
Jagadeesh D. [1 ]
机构：
[1] Department of Electrical and Electronics Engineering, SreeVidyanikethan Engineering College, Tirupati
来源：
Materials Today: Proceedings | 2022年 / 68卷
关键词：
Fire point; Flash point; Mineral oil; Natural oils; Viscosity;
D O I：
10.1016/j.matpr.2022.05.523
中图分类号：
学科分类号：
摘要：
The primary objective of this study is to find a high-performance, eco sustainable, biodegradable natural oil that may be used as a coolant and dielectric fluid. With this in cognizance, the primary goal is to conduct laboratory tests in accordance with IEC (International Electro technical Commission) testing methods to study the thermo-electric properties of the different natural oils in both virgin and thermally aged states. The tests were performed with commercially available natural oils such as corn oil, palm oil, sunflower oil and coconut oil. In order to observe the difference thermal and electrical properties at rising temperature, accelerated ageing was used in the lab to expose the oil to extreme temperature conditions for a timeframe. The liquid products were maintained in a temperature-controlled oven for 15 and 30 days at 150 degrees Celsius. Results obtained were compared to mineral oil in order to explore feasible natural oil as a substitute for existing mineral oil, and the results are reported in this work. © 2022
引用
收藏
页码：1208 / 1213
页数：5
相关论文
共 50 条
  • [41] A COUPLED THERMO-ELECTRICAL PROBLEM FOR THE OPTIMIZATION OF RADIO FREQUENCY ABLATION TREATMENTS
    Formisano, Alessandro
    Ferraioli, Fabrizio
    Martone, Raffaele
    [J]. COMPUTATIONAL METHODS FOR COUPLED PROBLEMS IN SCIENCE AND ENGINEERING V, 2013, : 379 - 386
  • [42] Bridges of debris in the EDD process: Going beyond the thermo-electrical model
    Gatto, Andrea
    Bassoli, Elena
    Denti, Lucia
    Iuliano, Luca
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (03) : 349 - 360
  • [43] Thermo-electrical buckling of piezoelectric functionally graded material Timoshenko beams
    Y. Kiani
    M. Rezaei
    S. Taheri
    M. R. Eslami
    [J]. International Journal of Mechanics and Materials in Design, 2011, 7 : 185 - 197
  • [44] Mechanical damage assessment by means of Thermo-electrical lock-in Thermography
    Kordatos, E. Z.
    Exarchos, D. A.
    Matikas, T. E.
    [J]. NONDESTRUCTIVE CHARACTERIZATION AND MONITORING OF ADVANCED MATERIALS, AEROSPACE, AND CIVIL INFRASTRUCTURE 2016, 2016, 9804
  • [45] Development of thermo-electrical loss model for photovoltaic module with inhomogeneous temperature
    Ma, Xun
    Li, Ming
    Peng, Ye
    Sun, Linyao
    Chen, Chuangye
    [J]. ENERGY, 2022, 248
  • [46] The rectifier effect of silicon and its position in the thermo-electrical tension range
    Fischer, F
    Baerwind, E
    [J]. PHYSIKALISCHE ZEITSCHRIFT, 1916, 17 : 373 - 376
  • [47] Thermo-electrical instabilities arising in proton exchange membrane of fuel cell
    Bograchev, D. A.
    Martemianov, S.
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (13-14) : 3024 - 3030
  • [48] Investigation of microhardness and thermo-electrical properties in the Sn–Cu hypereutectic alloy
    E. Çadırlı
    U. Böyük
    S. Engin
    H. Kaya
    N. Maraşlı
    M. Arı
    [J]. Journal of Materials Science: Materials in Electronics, 2010, 21 : 468 - 474
  • [49] Microstructure and thermo-electrical transport properties of Cd-Sn alloys
    Ari, M.
    Saatci, B.
    Gunduz, M.
    Meydaneri, F.
    Bozoklu, M.
    [J]. MATERIALS CHARACTERIZATION, 2008, 59 (05) : 624 - 630
  • [50] Thermo-electrical buckling of piezoelectric functionally graded material Timoshenko beams
    Kiani, Y.
    Rezaei, M.
    Taheri, S.
    Eslami, M. R.
    [J]. INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN, 2011, 7 (03) : 185 - 197
12345