Influence of pulse duration on the fatigue behavior of a carbon-fiber-reinforced composite under cyclic three-point bending at 20 kHz

被引：0
|
作者：
Premanand, Aravind [1 ]
Balle, Frank [1 ,2 ,3 ]
机构：
[1] Walter-and-Ingeborg-Herrmann Chair for Power Ultrasonics and Engineering of Functional Materials (EFM), Department for Sustainable Systems Engineering (INATECH), Faculty of Engineering, University of Freiburg, Freiburg, Germany
[2] Freiburg Materials Research Center (FMF), Freiburg, Germany
[3] Fraunhofer Institute for High Speed Dynamics, Ernst Mach Institute (EMI), Freiburg, Germany
来源：
Fatigue and Fracture of Engineering Materials and Structures | 2024年 / 47卷 / 05期
关键词：
Very high cycle fatigue (VHCF) experiments are limited in practice due to their long testing times. In ultrasonic fatigue test (UFT) systems; the cyclic oscillation is applied using resonance at 20 kHz with a pulse and pause sequence. However; determining optimal pulse durations to achieve minimal testing time and avoid thermal-induced fatigue damage in fiber-reinforced polymer composites remains a challenge. In this work; several fatigue experiments; temperature analyses; and digital light optical microscopy were carried out to evaluate the influence of pulse duration on the fatigue behavior of a carbon-fiber fabric reinforced in polyether-ketone-ketone (CF-PEKK) composite. A shorter pulse duration with the same pulse–pause ratio as the longer pulse duration is proposed for higher stress amplitudes to avoid any thermal influence during mechanical fatigue without altering the underlying fatigue damage mechanisms. © 2024 The Authors. Fatigue & Fracture of Engineering Materials & Structures published by John Wiley & Sons Ltd;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：1731 / 1747
相关论文
共 50 条
  • [31] Cumulative fatigue damage for 3-D angle-interlock woven composite under three-point bending cyclic loading
    Jin, Limin
    Sun, Baozhong
    Gu, Bohong
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2013, 22 (01) : 3 - 16
  • [32] Three-point bending fatigue behavior of 3D angle-interlock woven composite
    Jin, Limin
    Hu, Hong
    Sun, Baozhong
    Gu, Bohong
    JOURNAL OF COMPOSITE MATERIALS, 2012, 46 (08) : 883 - 894
  • [33] Electric and acoustic activity in notched fiber-reinforced concrete beams under three-point bending
    Triantis, Dimos
    Tsaousi, Dimitri K.
    Stavrakas, Ilias
    Pasiou, Ermioni D.
    Douvis, Panagiotis
    Kourkoulis, Stavros K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 32 : 148 - 155
  • [34] Flexural toughness of hybrid fiber reinforced high-performance concrete under three-point bending
    Xia, Dongtao
    Liu, Xiangkun
    Zhou, Boru
    ARCHITECTURE, BUILDING MATERIALS AND ENGINEERING MANAGEMENT, PTS 1-4, 2013, 357-360 : 1110 - 1114
  • [35] A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates Under Three-Point Bending Using Acoustic Emission
    Liu P.F.
    Yang J.
    Wang B.
    Zhou Z.F.
    Zheng J.Y.
    Journal of Failure Analysis and Prevention, 2014, 15 (01) : 101 - 121
  • [36] Progressive Damage Analysis of Carbon Fabric-reinforced Polymer Composites under Three-point Bending
    Kang-ning Han
    Wei Zhou
    Reng Qin
    Sa Yang
    Lian-Hua Ma
    Fibers and Polymers, 2021, 22 : 469 - 479
  • [37] Progressive Damage Analysis of Carbon Fabric-reinforced Polymer Composites under Three-point Bending
    Han, Kang-ning
    Zhou, Wei
    Qin, Reng
    Yang, Sa
    Ma, Lian-Hua
    FIBERS AND POLYMERS, 2021, 22 (02) : 469 - 479
  • [38] Dynamic fatigue behavior of cracked piezoelectric ceramics in three-point bending under AC electric fields
    Narita, Fumio
    Morikawa, Yu
    Shindo, Yasuhide
    Sato, Masayuki
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (14) : 3759 - 3766
  • [39] Design of hybrid sandwich panel with aluminum foam core and carbon fiber reinforced plastic face sheets under three-point bending
    Mohan, K.
    Yip, T. H.
    Sridhar, I.
    Seow, H. P.
    SCIENCE AND TECHNOLOGY OF HYBRID MATERIALS, 2006, 111 : 63 - 66
  • [40] A study on mechanical properties of carbon fiber reinforced plastics by three-point bending testing and transverse static response
    Lee, Seung-Chul
    Jeong, Seong-Taek
    Park, Jong-Nam
    Kim, Sun jin
    Cho, Gyu-Jae
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 201 (1-3) : 761 - 764
12345