Application of Ag-Cu-Ti active metal composite filler in ceramic joining:a review

被引：0

作者：

Yuhang Li ^{[1
]}

Jun Wang ^{[2
]}

Ziyan Shen ^{[2
]}

Hangli Qian ^{[1
]}

Wanliang Zhang ^{[1
]}

Kaiyu Zhang ^{[1
]}

Danqing Ying ^{[1
]}

Qihang Zhou ^{[1
]}

Chengshuang Zhou ^{[1
]}

Lin Zhang ^{[1
]}

机构：

[1] Institute of Material Forming and Control Engineering,Zhejiang University of Technology

[2] Zhejiang Baima Lake Laboratory

来源：

Frontiers of Materials Science | 2023年 / 17卷 / 04期

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

As a structural and functional material with excellent properties,ceramics play an extremely important role in a wide range of industries,including life and production.To expand the range of applications for ceramic materials,ceramics are often joined to metals and then used.Among the physical and chemical joining methods of ceramics to metals,the AMB method is efficient and simple,suitable for industrial applications,and has been a hot topic of research.However,due to the problems of residual stresses caused by the large difference in thermal expansion coefficients between ceramic and metal brazing,composite fillers have become a very worthwhile solution by regulating the physical properties of the brazing material and improving the weld structure.This review describes the wetting principle and application of Ag-Cu-Ti active metal filler in the field of ceramic joining,with emphasis on the current stage of composite filler,and discusses the influence on the former brazing properties and organization after the introduction of dissimilar materials.

引用

页数：35

共 50 条

[41] Relief of residual stress in Al2O3/Nb joints brazed with Ag-Cu-Ti/Cu/Ag-Cu-Ti composite interlayer
Zhao, Yating
Wang, Ying
Yang, Zhenwen
Wang, Dongpo
[J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2019, 19 (01) : 1 - 10
[42] Joining interface and compressive strength of brazed cubic boron nitride grains with Ag-Cu-Ti/TiX composite fillers
Miao, Qing
Ding, Wenfeng
Zhu, Yejun
Chen, Zhenzhen
Xu, Jiuhua
Yang, Changyong
[J]. CERAMICS INTERNATIONAL, 2016, 42 (12) : 13723 - 13737
[43] Joining of Si-Ti-C-O fibre-assembled ceramic composites with 72Ag-26Cu-2Ti filler metal
Nakamura, M
Shigematsu, I
[J]. JOURNAL OF MATERIALS SCIENCE, 1996, 31 (22) : 6099 - 6104
[44] Joining of Si-Ti-C-O fibre-assembled ceramic composites with 72Ag-26Cu-2Ti filler metal
Natl Industrial Research Inst of, Nagoya, Nagoya, Japan
[J]. J Mater Sci, 22 (6099-6104):
[45] Sapphire joining using Ag70.5Cu27.5Ti2 brazing filler metal
Ning, HL
Huang, FX
Ma, JS
Geng, ZT
Han, ZD
[J]. RARE METAL MATERIALS AND ENGINEERING, 2003, 32 (03) : 236 - 239
[46] Effect of cerium on microstructure,wetting and mechanical properties of Ag-Cu-Ti filler alloy
杨长勇
徐九华
丁文锋
陈珍珍
傅玉灿
[J]. Journal of Rare Earths, 2009, 27 (06) : 1051 - 1055
[47] Effect of cerium on microstructure, wetting and mechanical properties of Ag-Cu-Ti filler alloy
Yang Changyong
Xu Jiuhua
Ding Wenfeng
Chen Zhenzhen
Fu Yucan
[J]. JOURNAL OF RARE EARTHS, 2009, 27 (06) : 1051 - 1055
[48] Brazing mechanism and shear strength of SiAlON/WC-Co joint using Ag-Cu-Ti active filler
Zhou, Yi
Liu, Yuan
Chen, Jia-Pei
Guo, Wei-Ming
Luo, Si-Chun
Lin, Hua-Tay
[J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2024,
[49] Microstructure and mechanical properties of transparent alumina and TiAl alloy joints brazed using Ag-Cu-Ti filler metal
Liu, X. P.
Zhang, L. X.
Sun, Z.
Feng, J. C.
[J]. VACUUM, 2018, 151 : 80 - 89
[50] First-principles calculations on wetting interface between Ag-Cu-Ti filler metal and SiC ceramic: Ag (111)/SiC (111) interface and Ag (111)/TiC (111) interface
Yang, Jian
Ye, Zheng
Huang, Jihua
Chen, Shuhai
Zhao, Yue
[J]. APPLIED SURFACE SCIENCE, 2018, 462 : 55 - 64

← 1 2 3 4 5 →