SIMULATION OF HEAT AND MOISTURE TRANSFER IN WOOD DURING DRYING UNDER CONSTANT AMBIENT CONDITIONS

被引：8
|
作者：
LIU, J [1 ]
AVRAMIDIS, S [1 ]
ELLIS, S [1 ]
机构：
[1] UNIV BRITISH COLUMBIA,DEPT WOOD SCI,389-2357 MAIN MALL,VANCOUVER V6T 1Z4,BC,CANADA
来源：
HOLZFORSCHUNG | 1994年 / 48卷 / 03期
关键词：
WOOD; DRYING; MODELING; MOISTURE PROFILES; TEMPERATURE PROFILES;
D O I：
10.1515/hfsg.1994.48.3.236
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
A mathematical model that simulates heat and moisture transfer in wood during drying was developed. In this model, the moisture flux was separated into that of the liquid and that of the vapour phase. The moisture content and vapour concentration gradients were taken as the driving forces for the liquid and vapour fluxes, respectively. The simulation results were compared to experimentally measured average moisture content and temperature inside a green piece of wood undergoing desorption in a constant temperature and humidity environment. The simulated profiles of moisture content and temperature at different stages of desorption are also presented.
引用
收藏
页码：236 / 240
页数：5
相关论文
共 50 条
  • [41] Numerical and experimental analysis of heat and moisture transfer during drying of Ataulfo mango
    Villa-Corrales, L.
    Flores-Prieto, J. J.
    Xaman-Villasenor, J. P.
    Garcia-Hernandez, E.
    JOURNAL OF FOOD ENGINEERING, 2010, 98 (02) : 198 - 206
  • [42] Heat and mass transfer in fry drying of wood
    Grenier, D.
    Bohuon, P.
    Meot, J. -M.
    Lecomte, D.
    Bailleres, H.
    DRYING TECHNOLOGY, 2007, 25 (1-3) : 511 - 518
  • [43] Simulation of Heat Transfer for Contact Drying of Fibrous and High-Moisture Materials with Variable Heat Supply
    G. V. Kalashnikov
    Fibre Chemistry, 2023, 55 : 1 - 5
  • [44] Simulation of Heat Transfer for Contact Drying of Fibrous and High-Moisture Materials with Variable Heat Supply
    Kalashnikov, G. V.
    FIBRE CHEMISTRY, 2023, 55 (01) : 1 - 5
  • [45] CHANGE IN THE WOOD MOISTURE DEPENDENCY ON TIME AND DRYING CONDITIONS FOR HEATING BY WOOD COMBUSTION
    Horak, Jiri
    Kubonova, Lenka
    Tomsejova, Sarka
    Laciok, Vendula
    Krpec, Kamil
    Hopan, Frantisek
    Kubesa, Petr
    Kysucan, Zdenek
    Ochodek, Tadeas
    WOOD RESEARCH, 2018, 63 (02) : 261 - 272
  • [46] Mechanical behavior of heat-treated spruce (Picea abies) wood at constant moisture content and ambient humidity
    Borrega, Marc
    Karenlampi, Petri P.
    HOLZ ALS ROH-UND WERKSTOFF, 2008, 66 (01) : 63 - 69
  • [47] Mathematical modeling of processes of heat and mass transfer during drying of wood biomass
    Ivanova, Natalya
    Bulba, Elena
    HEAT AND MASS TRANSFER IN THE THERMAL CONTROL SYSTEM OF TECHNICAL AND TECHNOLOGICAL ENERGY EQUIPMENT (HMTTSC-2018), 2018, 194
  • [48] MOISTURE TRANSPORT IN WOOD DURING CONVECTIVE VACUUM DRYING
    NEUMANN, R
    MIELKE, A
    GLOS, P
    HOLZ ALS ROH-UND WERKSTOFF, 1993, 51 (03) : 156 - 162
  • [49] Shape and size of Jatropha fruit during drying under five ambient conditions
    Siqueira, Valdiney C.
    Resende, Osvaldo
    Chaves, Tarcisio H.
    Soares, Frederico A. L.
    REVISTA BRASILEIRA DE ENGENHARIA AGRICOLA E AMBIENTAL, 2012, 16 (08): : 864 - 870
  • [50] Mechanism of two-dimensional heat and mass transfer during convective drying of porous media under different drying conditions
    Boukadida, N
    Ben Nasrallah, S
    Perre, P
    DRYING TECHNOLOGY, 2000, 18 (07) : 1367 - 1388
12345