IMPROVEMENT OF MN YIELD IN LESS SLAG BLOWING AT BOF BY USE OF SINTERED MANGANESE ORE

被引：16

作者：

KANEKO, T ^{[1
]}

MATSUZAKI, T ^{[1
]}

KUGIMIYA, T ^{[1
]}

IDE, K ^{[1
]}

KUMAKURA, M ^{[1
]}

KASAMA, A ^{[1
]}

机构：

[1] NIPPON STEEL CORP LTD,OITA WORKS,KITAKYUSHU 805,JAPAN

来源：

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1993年 / 79卷 / 08期

关键词：

STEELMAKING; SMELTING REDUCTION; MANGANESE ORE; CONVERTER; LESS SLAG BLOWING; SLAG;

D O I：

10.2355/tetsutohagane1955.79.8_941

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In order to improve manganese recovery by smelting reduction of manganese ore during less slag blowing at BOF, the effects of sintered manganese ore on reduction behavior have been studied both in 100kg laboratory scale and in 340t industrial scale tests. Results obtained in this work are summarized as follows. 1) The oxidation of [Mn] during addition of manganese ore is suppressed by using sintered manganese ore, because the active oxygen in manganese ore can be decreased to one third by sintering. 2) Addition of CaO to sinter is very effective for increasing the reduction rate of (MnO). Especially, it is most effective when CaO/SiO2 of sinter is more than 3. 3) Using the sinter with CaO/SiO2 of 3.05, manganese recovery in industrial converter can be increased to 70-80%, when the amount of sinter is 12-13kg/t and also end-point [C] is 0.10-0.18%. (65% for raw manganese ore) 4) These effects of high basicity sinter are due to both early slagging and decreasing (%MnO)/[%Mn].

引用

下载

页码：941 / 947

页数：7

共 8 条

[1] DISSOLUTION AND REDUCTION BEHAVIOR OF MANGANESE ORE IN LESS SLAG BLOWING AT BOF
KANEKO, T
MATSUZAKI, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1993, 79 (04): : 472 - 478
[2] MANGANESE PARTITION EQUILIBRIUM IN LESS SLAG BLOWING AT BOF LINKED TO HIGH-SPEED DEPHOSPHORIZATION OF HOT METAL
TABATA, Y
TERADA, O
HASEGAWA, T
KIKUCHI, Y
KAWAI, Y
MURAKI, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (11): : 1916 - 1923
[3] Mn Ore Smelting Reduction Based on Double Slag Operation in BOF
Yang, Zhizheng
Li, Guangqiang
Huang, Chenghong
Ding, Jinfa
MATERIALS PROCESSING AND MANUFACTURING III, PTS 1-4, 2013, 753-755 : 76 - +
[4] DEVELOPMENT OF BLOWING TECHNOLOGY IN BOF BY USING PRETREATED METAL .2. TECHNOLOGY OF DECREASING (T=FE) IN SLAG WITH LESS SLAG BLOWING
MURAKI, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (04): : S242 - S242
[5] DEVELOPMENT OF BLOWING TECHNOLOGY IN BOF BY USING PRETREATED METAL .3. COMPUTER CONTROL OF LESS SLAG BLOWING
KAWAKAMI, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1044 - 1044
[6] MANGANESE REACTION-RATE IN COMBINED BLOWING CONVERTER WITH LESS SLAG
TAKAOKA, T
SUMI, I
KIKUCHI, Y
KAWAI, Y
ISIJ INTERNATIONAL, 1993, 33 (01) : 98 - 103
[7] Fundamental studies on direct alloying using chromium ore in less slag blowing at basic oxygen converter
Zhang, F.S., 2001, Chinese Society for Metals (36):
[8] EXPERIMENTAL MELTING OF HIGH-SILICON FERROMANGANESE WITH THE USE OF FERROMANGANESIAN ORE AND MANGANESE SLAG
Baisanov, A.
Maishina, Zh
Isagulov, A.
Smagulova, N.
Yudakova, V
METALURGIJA, 2021, 60 (1-2): : 89 - 92

← 1 →