BUCKLING AND STRENGTH CHARACTERISTICS OF SOME CFRP STIFFENED CURVED PANELS

被引：5
|
作者：
SNELL, MB
GREAVES, LJ
机构：
[1] Royal Armaments Research and Development Establishment, Christchurch, Dorset BH23 2BB, Barrack Road
[2] Materials and Structures Department, Royal Aerospace Establishment, Farnborough
来源：
THIN-WALLED STRUCTURES | 1991年 / 11卷 / 1-2期
关键词：
D O I：
10.1016/0263-8231(91)90015-B
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This paper describes the initial and post-buckling behaviour of CFRP stringer-stiffened curved panels. The panels are of 500-mm radius, 2-mm thickness and have either three or four blade stringers. Initial buckling loads were calculated using the finite strip code VIPASA within the design optimisation program PASCO. An unstiffened, externally supported panel is also considered. Stringer stiffening gave higher buckling loads than external supports. The initial buckling behaviour was influenced by geometric imperfections, and methods of modelling these with PASCO are discussed. The imperfections caused scatter in buckling load, but there was minimal scatter in failure load, despite the presence of impact damage in some cases. The failure loads were about 50% higher than the buckling loads. © 1990.
引用
收藏
页码：149 / 176
页数：28
相关论文
共 50 条
  • [21] NUMERICAL RESULTS FOR INITIAL BUCKLING OF SOME STIFFENED PANELS IN COMPRESSION
    WILLIAMS, FW
    WITTRICK, WH
    [J]. AERONAUTICAL QUARTERLY, 1972, 23 (FEB): : 24 - &
  • [22] Dynamic buckling of stiffened panels
    Mouhat, Ouadia
    Abdellatif, Khamlichi
    [J]. CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE, 2015, 125 : 1001 - 1007
  • [23] Buckling/post-buckling strength of friction stir welded aircraft stiffened panels
    Murphy, A.
    Ekmekyapar, T.
    Ozakca, M.
    Poston, K.
    Moore, G.
    Elliott, M.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING, 2014, 228 (02) : 178 - 192
  • [24] CRITICAL BUCKLING OF SOME STIFFENED PANELS IN COMPRESSION, SHEAR AND BENDING
    PLANK, RJ
    WILLIAMS, FW
    [J]. AERONAUTICAL QUARTERLY, 1974, 25 (AUG): : 165 - 179
  • [25] Optimization of in-plane functionally graded panels for buckling strength: Unstiffened, stiffened panels, and panels with cutouts
    Hussein, Omar S.
    Mulani, Sameer B.
    [J]. THIN-WALLED STRUCTURES, 2018, 122 : 173 - 181
  • [26] Generalized probabilistic response surfaces for the buckling strength assessment of stiffened panels
    Anyfantis, Konstantinos N.
    Pantazopoulou, Sofia
    Papanikolaou, Nikolaos
    [J]. THIN-WALLED STRUCTURES, 2023, 189
  • [27] CYCLIC BUCKLING TESTS OF PRE-DAMAGED CFRP STRINGER-STIFFENED PANELS
    Wilckens, Dirk
    Degenhardt, Richard
    Rohwer, Klaus
    Zimmermann, Rolf
    Kepke, Markus
    Hildebrandt, Bernd
    Zipfel, Ary
    [J]. INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2010, 10 (04) : 827 - 851
  • [28] Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels
    Kolanu, Naresh Reddy
    Raju, Gangadharan
    Ramji, M.
    [J]. COMPOSITE STRUCTURES, 2018, 196 : 135 - 154
  • [29] EXPERIMENTAL BUCKLING STUDY OF SKIN-CORRUGATED RING-STIFFENED CURVED PANELS
    TENERELL.DJ
    HOLMES, AMC
    [J]. EXPERIMENTAL MECHANICS, 1972, 12 (05) : N33 - &
  • [30] BUCKLING OF STIFFENED CURVED PANELS AND CYLINDRICAL SHELLS: A STUDY OF COMPARISON AMONG VARIOUS THEORIES
    Harutyunyan, S.
    Hasanyan, D. J.
    Davis, R. B.
    [J]. INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2012, VOL 8, 2012, : 131 - 138
12345