BUCKLING AND STRENGTH CHARACTERISTICS OF SOME CFRP STIFFENED CURVED PANELS

被引：5
|
作者：
SNELL, MB
GREAVES, LJ
机构：
[1] Royal Armaments Research and Development Establishment, Christchurch, Dorset BH23 2BB, Barrack Road
[2] Materials and Structures Department, Royal Aerospace Establishment, Farnborough
来源：
THIN-WALLED STRUCTURES | 1991年 / 11卷 / 1-2期
关键词：
D O I：
10.1016/0263-8231(91)90015-B
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This paper describes the initial and post-buckling behaviour of CFRP stringer-stiffened curved panels. The panels are of 500-mm radius, 2-mm thickness and have either three or four blade stringers. Initial buckling loads were calculated using the finite strip code VIPASA within the design optimisation program PASCO. An unstiffened, externally supported panel is also considered. Stringer stiffening gave higher buckling loads than external supports. The initial buckling behaviour was influenced by geometric imperfections, and methods of modelling these with PASCO are discussed. The imperfections caused scatter in buckling load, but there was minimal scatter in failure load, despite the presence of impact damage in some cases. The failure loads were about 50% higher than the buckling loads. © 1990.
引用
收藏
页码：149 / 176
页数：28
相关论文
共 50 条
  • [1] Buckling analysis of stiffened composite curved panels
    Elumalai, E. S.
    Krishnaveni, G.
    Kumar, R. Sarath
    Xavier, D. Dominic
    Kavitha, G.
    Seralathan, S.
    Hariram, V
    Premkumar, T. Micha
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 3604 - 3611
  • [2] Buckling collapse of edge stiffened curved panels
    Foster, CG
    Muir, RG
    [J]. ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2, 1996, : 875 - 880
  • [3] Buckling Strength of Damaged Stiffened Panels
    Amante, Diogo do Amaral
    Estefen, Segen F.
    [J]. OMAE2011: PROCEEDINGS OF THE ASME 30TH INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE AND ARCTIC ENGINEERING, VOL 2: STRUCTURES, SAFETY AND RELIABILITY, 2011, : 463 - +
  • [4] The effect of distortion on the buckling strength of stiffened panels
    Chaithanya, Pretheesh Paul
    Das, Purnendu K.
    Crow, Anthony
    Hunt, Stuart
    [J]. SHIPS AND OFFSHORE STRUCTURES, 2010, 5 (02) : 141 - 153
  • [5] The buckling characteristics of some integrally formed bead stiffened composite panels
    Hosseini-Toudeshky, H
    Loughlan, J
    Kharazi, M
    [J]. THIN-WALLED STRUCTURES, 2005, 43 (04) : 629 - 645
  • [6] PBCOMP PROGRAM FOR BUCKLING AND POSTBUCKLING OF STIFFENED LAMINATED CURVED PANELS
    SHEINMAN, I
    FROSTIG, Y
    SEGAL, A
    [J]. COMPUTERS & STRUCTURES, 1992, 42 (01) : 87 - 95
  • [7] Investigations on Buckling Behaviour of Laminated Curved Composite Stiffened Panels
    Kumar, N. Jeevan
    Babu, P. Ramesh
    Pandu, Ratnakar
    [J]. APPLIED COMPOSITE MATERIALS, 2014, 21 (02) : 359 - 376
  • [8] Buckling of stiffened curved panels under uniform axial compression
    Tran, K. L.
    Douthe, C.
    Sab, K.
    Dallot, J.
    Davaine, L.
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2014, 103 : 140 - 147
  • [9] Buckling Analysis and Optimization of Stiffened Composite Flat and Curved Panels
    Vescovini, Riccardo
    Bisagni, Chiara
    [J]. AIAA JOURNAL, 2012, 50 (04) : 904 - 915
  • [10] Investigations on Buckling Behaviour of Laminated Curved Composite Stiffened Panels
    N. Jeevan Kumar
    P. Ramesh Babu
    Ratnakar Pandu
    [J]. Applied Composite Materials, 2014, 21 : 359 - 376
12345