EFFECT OF ROLL DIAMETER IN COLD-ROLLING ON THE R-VALUE AND SPECULAR GLOSSINESS IN 17-PERCENT-CR STAINLESS-STEEL SHEET

被引：0

作者：

HARASE, J ^{[1
]}

OHTA, K ^{[1
]}

AKITA, K ^{[1
]}

机构：

[1] NIPPON STEEL CORP LTD,ELECTR RES & DEV LABS 3,KITAKYUSHU 805,JAPAN

来源：

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1991年 / 77卷 / 05期

关键词：

FERRITIC STAINLESS STEEL; COLD ROLLING; 17-PERCENT-CR STEEL; SUS430; R-VALUE;

D O I：

10.2355/tetsutohagane1955.77.5_660

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effect of roll diameter in cold rolling on r-value and specular glossiness on 17%Cr stainless steel sheet has been investigated. It was found that r-value increased with increasing roll diameter in the cold rolling and the specular glossiness increased when cold rolled with small diameter roll in the later part of cold rolling. Combination of large diameter roll in the former stage of cold rolling and small diameter in the later stage of cold rolling gave better r-value and higher specular glossiness than cold rolled only by small or large diameter roll.

引用

页码：660 / 666

页数：7

共 43 条

[21] EFFECT OF ALLOYING ELEMENT ON COLD FORGEABILITY OF 12-PERCENT CR STAINLESS-STEEL
FUJII, H
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S537 - S537
[22] Influence of the Cold Rolling Reduction on the Texture Development and r-Value Anisotropy in Ti-stabilized 18% Cr Ferritic Stainless Steel
Jung, I.
Chae, D.
De Cooman, B. C.
[J]. TEXTURE AND ANISOTROPY OF POLYCRYSTALS III, 2010, 160 : 129 - +
[23] DEVELOPMENT OF HIGH STRENGTH-NONMAGNETIC STAINLESS-STEEL .1. EFFECT OF ALLOYING ELEMENTS AND COLD-ROLLING ON PERMEABILITY OF AUSTENITIC STAINLESS-STEEL
TAKEMOTO, T
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1445 - 1445
[24] EFFECT OF INTERPASS TIME IN ROUGH ROLLING PROCESS ON THE ORIENTATION DISTRIBUTION IN 17-DEGREES-CR STAINLESS-STEEL SHEET
HARASE, J
OHTA, K
SHIMIZU, R
TAKESHITA, T
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (09): : 1520 - 1527
[25] EFFECT OF COILING TEMPERATURE IN HOT-ROLLING ON THE MECHANICAL-PROPERTIES IN 17-DEGREES-CR STAINLESS-STEEL SHEET
HARASE, J
TAKESHITA, T
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (09): : 1528 - 1535
[26] EFFECT OF ADDITION OF COPPER OR TITANIUM ON RECRYSTALLIZATION TEXTURE OF 17-PERCENT CR STAINLESS-STEEL
MIYAJI, H
WATANABE, S
[J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1978, 42 (07) : 688 - 697
[27] EXPERIMENTAL AND NUMERICAL-ANALYSES OF EFFECT OF THERMAL-STABILITY OF LUBRICANTS ON HEATSTREAKS IN COLD-ROLLING OF STAINLESS-STEEL
YAMAMOTO, H
SHIRAISHI, T
ATAKA, M
IWASAKI, Y
[J]. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1993, 115 (03): : 532 - 537
[28] DEVELOPMENT OF WEAR-RESISTING 5-PERCENT-CR-MO-V FORGED STEEL WORK ROLL FOR COLD-ROLLING MILLS
OHORI, M
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1255 - 1255
[29] EFFECT OF COLD-ROLLING CONDITION ON RBAR-VALUE OF COLD-ROLLED EXTRA-LOW-CARBON STEEL SHEET WITH TI, CR, AND NB ADDITION
TANAKA, J
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S520 - S520
[30] DEVELOPMENT OF HIGH STRENGTH-NONMAGNETIC STAINLESS-STEEL .2. EFFECT OF ALLOYING ELEMENTS, COLD-ROLLING AND AGING TREATMENT ON MECHANICAL-PROPERTIES OF AUSTENITIC STAINLESS-STEEL
TAKEMOTO, T
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1446 - 1446

← 1 2 3 4 5 →