EFFECT OF ROLL DIAMETER IN COLD-ROLLING ON THE R-VALUE AND SPECULAR GLOSSINESS IN 17-PERCENT-CR STAINLESS-STEEL SHEET

被引：0

作者：

HARASE, J ^{[1
]}

OHTA, K ^{[1
]}

AKITA, K ^{[1
]}

机构：

[1] NIPPON STEEL CORP LTD,ELECTR RES & DEV LABS 3,KITAKYUSHU 805,JAPAN

来源：

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1991年 / 77卷 / 05期

关键词：

FERRITIC STAINLESS STEEL; COLD ROLLING; 17-PERCENT-CR STEEL; SUS430; R-VALUE;

D O I：

10.2355/tetsutohagane1955.77.5_660

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Effect of roll diameter in cold rolling on r-value and specular glossiness on 17%Cr stainless steel sheet has been investigated. It was found that r-value increased with increasing roll diameter in the cold rolling and the specular glossiness increased when cold rolled with small diameter roll in the later part of cold rolling. Combination of large diameter roll in the former stage of cold rolling and small diameter in the later stage of cold rolling gave better r-value and higher specular glossiness than cold rolled only by small or large diameter roll.

引用

页码：660 / 666

页数：7

共 41 条

[1] EFFECT OF ROUGH ROLLING CONDITION ON THE FORMABILITY AND RIDGING OF 17-PERCENT-CR STAINLESS-STEEL SHEET
HARASE, J
TAKESHITA, T
KAWAMO, Y
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (08): : 1296 - 1303
[2] EFFECT OF NITROGEN ON RECRYSTALLIZATION TEXTURE OF 17-PERCENT-CR STAINLESS-STEEL SHEET
MIYAJI, H
WATANABE, S
[J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1978, 42 (10): : 999 - 1007
[3] EFFECT OF ROLL DIAMETER OF COLD-ROLLING MILL ON THE FORMABILITY OF SUS430 STAINLESS-STEEL SHEET .6.
HARASE, J
AKITA, K
OHTA, K
UEDA, M
TAKAHASI, E
NAKAJIMA, K
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 24 (03) : B97 - B97
[4] EFFECT OF TEMPER ROLLING ON R-VALUE OF COLD-ROLLED STEEL SHEET
HAMANAKA, S
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1254 - 1254
[5] DEVELOPMENT OF PRODUCTION OF STAINLESS-STEEL SHEET IN NEW COLD-ROLLING MILL
GRISHKOV, AI
ZEMLYANSKII, YI
SHLYAMNEV, AP
AGISHEV, LA
NIKITIN, VP
VLADIMIROV, SM
[J]. STEEL IN THE USSR, 1982, 12 (03): : 109 - 112
[6] EFFECT OF TEMPER ROLLING ON R-VALUE OF COLD-ROLLED STEEL SHEET
HAMANAKA, S
ISHIMOTO, Y
MUNESHITA, M
KAWASE, H
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 25 (02) : B78 - B78
[7] Effect of single and double cold-rolling reductions on the planar anisotropy of r-value in sheet steels
Okuda, K
Fujinaga, C
Tosaka, A
Furukimi, O
Kuguminato, H
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2000, 86 (01): : 32 - 37
[8] EFFECT OF NITROGEN ON RECRYSTALLIZATION TEXTURE OF 17-PERCENT CR STAINLESS-STEEL SHEET
MIYAJI, H
WATANABE, S
[J]. TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1981, 23 (01): : 1 - 10
[9] EFFECT OF INITIAL ORIENTATION ON THE COLD-ROLLING BEHAVIOR OF SOLIDIFIED COLUMNAR CRYSTALS IN A 19-PERCENT CR FERRITIC STAINLESS-STEEL
TSUJI, N
TSUZAKI, K
MAKI, T
[J]. ISIJ INTERNATIONAL, 1992, 32 (12) : 1319 - 1328
[10] EFFECTS OF HOT-ROLLING CONDITIONS ON HOT ROLLED MICROSTRUCTURES AND RIDGING PROPERTIES IN 17-PERCENT-CR FERRITIC STAINLESS-STEEL
UEMATSU, Y
YAMAZAKI, K
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1992, 78 (04): : 632 - 639

← 1 2 3 4 5 →