Effect of Microstructure on Superconducting Properties of Mo/34 at.% Re Alloy

被引:16
|
作者
Witcomb, M. J. [1 ]
Echarri, A. [1 ]
Narlikar, A. V. [1 ]
Dew-Hughes, D. [1 ]
机构
[1] Univ Lancaster, Dept Phys, Lancaster, England
关键词
D O I
10.1007/BF00585488
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of deformation and heat-treatments on magnetisation of superconducting Mo/34 at. % Re alloy was investigated. The microstructure was studied using optical and electron microscopy. The values of the parameter kappa of the GLAG theory were determined by using three different methods, and they are found to be in accordance with some of the predictions of the Maki theory. The results show that in deformed specimens the magnetic hysteresis is mainly due to the interaction of Abrikosov supercurrent vortices with dislocation tangles; both twin boundaries and grain boundaries are relatively ineffective in causing flux hindrance. The hysteresis observed after annealing has been explained in terms of the occurrence of dislocation rearrangement and the precipitation of the sigma phase. Flux-pinning by dislocation tangles has been treated as a special case of pinning by normal particles and a magnitude of the resulting pinning force is obtained. The experimental results are compared with the predictions of a theoretical model of flux-pinning.
引用
收藏
页码:191 / 205
页数:15
相关论文
共 50 条
  • [31] Effect of Cr on the microstructure and mechanical properties of diffusion-bonded Mo-Re alloy and 316L stainless steel
    Zhang, Runbo
    Wang, Gang
    Fu, Zhiyi
    Zhang, Shuye
    He, Peng
    MATERIALS LETTERS, 2022, 313
  • [32] Effect of Heat Treatment on Microstructure and Mechanical Properties of a Ti-Mo-Zr alloy
    Zhang, Xiao-Nong
    Cao, Peng
    STRUCTURAL INTEGRITY AND FAILURE, 2011, 275 : 155 - +
  • [33] Effect of W addition on microstructure and mechanical properties of Mo-Si-B alloy
    Hunan Provincial Key Defense Laboratory of High Temperature Wear-Resisting Materials and Preparation Technology, Hunan University of Science and Technology, Xiangtan, China
    Cailiao Rechuli Xuebao, 8 (22-27):
  • [34] Effect of Mo doping on the microstructure and properties of an Fe36Ni Invar alloy
    Dong, Liming
    Yu, Zhaopeng
    Hu, Xianjun
    Feng, Fang
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2020, 34 (31):
  • [35] Mechanical properties of Ti-6 at.% Mo-4 at.% Sn alloy wires and their application to medical guidewire
    Sutou, Y.
    Yamauchi, K.
    Takagi, T.
    Maeshima, T.
    Nishida, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 438 : 1097 - 1100
  • [36] Microstructure and Superconducting Properties of YBCO Bulk Superconductors With RE Substitutions
    Volochova, D.
    Antal, V.
    Piovarci, S.
    Kovac, J.
    Jirsa, M.
    Noudem, J. G.
    Diko, P.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (03)
  • [37] Effect of Aging on Microstructure and Shape Memory Properties of a Ni-48Ti-25Pd (At. Pct) Alloy
    Sasaki, Taisuke T.
    Hornbuckle, B. Chad
    Noebe, Ronald D.
    Bigelow, Glen S.
    Weaver, Mark L.
    Thompson, Gregory B.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (03): : 1388 - 1400
  • [38] SUPERCONDUCTING PROPERTIES OF SPUTTERED MO-C FILMS WITH COLUMNAR MICROSTRUCTURE
    WOOD, J
    KEEM, JE
    CHEN, JT
    KADIN, AM
    BURKHARDT, RW
    OVSHINSKY, SR
    IEEE TRANSACTIONS ON MAGNETICS, 1985, 21 (02) : 842 - 845
  • [39] Effect of Aging on Microstructure and Shape Memory Properties of a Ni-48Ti-25Pd (At. Pct) Alloy
    Taisuke T. Sasaki
    B. Chad Hornbuckle
    Ronald D. Noebe
    Glen S. Bigelow
    Mark L. Weaver
    Gregory B. Thompson
    Metallurgical and Materials Transactions A, 2013, 44 : 1388 - 1400
  • [40] Elevated re-aging of a piston aluminium alloy and effect on the microstructure and mechanical properties
    Tian, Lusha
    Guo, Yongchun
    Li, Jianping
    Wang, Jianli
    Duan, Hongbo
    Xia, Feng
    Liang, Minxian
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 738 : 375 - 379