Iron ore sintering with charcoal

被引:74
|
作者
Lovel, R. [1 ]
Vining, K. [2 ]
Dell'Amico, M. [3 ]
机构
[1] CSIRO Minerals, POB 312, Clayton, Vic 3169, Australia
[2] CSIRO Minerals, Kenmore, Qld 4069, Australia
[3] CSIRO Energy Technol, Newcastle, NSW 2300, Australia
关键词
Iron ore sintering; Greenhouse gas; Wood char;
D O I
10.1179/174328507X163887
中图分类号
TD [矿业工程];
学科分类号
0819 ;
摘要
The iron blast furnace is the most widely used and efficient producer of liquid iron; however, emissions from sintering and coking cause environmental pressure for the integrated steel works. The combustion of coke fines (breeze) during sintering contributes to greenhouse gases (e. g. carbon dioxide) and is a source of SOx and NOx emissions. Coking capacity is also constrained by environmental concerns and economic factors, such as increased coke consumption and short supply is leading to high prices. Improved coking practices, which result in reduced production of fines, are also contributing to the tight availability of breeze for sintering. This combination of factors presents an opportunity to consider alternatives to coke as a fuel for sintering. CSIRO Minerals has been investigating the use of wood biomass/char as a substitute for coke during sintering. Wood biomass, or char produced from it, is an attractive carbon source as carbon dioxide liberated during combustion can be sequestered back into growing biomass. It has great potential to reduce the emissions from integrated steelworks and improve their environmental acceptability. Harvested biomass/char is also a renewable and sustainable resource and can be integrated with good land management practices such as remediation of salinity affected land. Weeds, especially woody weeds, can also be used as a source of biomass for charcoal and integrating char production with weed management can help address a pressing environmental issue in Australia. Previous reported preliminary testwork indicated that the use of Red Gum char as a replacement for coke resulted in a product sinter of comparable quality, improvements in productivity and significant reductions in SOx and NOx emissions. In the latest testwork, CSIRO has examined the properties of a range of potential charcoals and has conducted a further series of granulation and small scale sintering trials with them in simulated Japanese Steel Mill iron ore blends. Sinter fuels characterised and evaluated include industry sourced coke breeze, commercially available wood char and a charcoal from prickly acacia (acacia nilotica). Prickly acacia has been declared a noxious weed, is widespread in Australia and is classified as a ` weed of national significance'. The results presented in this paper support the notion that charcoal outperforms coke in many aspects of iron ore sintering and factoring in environmental considerations makes the switch to charcoal even more favourable.
引用
收藏
页码:85 / 92
页数:8
相关论文
共 50 条
  • [21] Industrial waste and biomass charcoal composite fuel for iron ore sintering: harmless disposal of waste and carbon reduction
    Meng, Hanxiao
    Wang, Jiankang
    Zhou, Hao
    [J]. ENERGY & FUELS, 2024, 38 (15) : 14422 - 14434
  • [22] Influence of iron ore properties on dioxin emissions during iron ore sintering
    Xiaoteng Zhou
    Vladimir Strezov
    Tim Evans
    Khushbu Salian
    Mark Patrick Taylor
    [J]. Scientific Reports, 12 (1)
  • [23] Sintering of iron-ore pellets with added borate ore
    Akberdin, AA
    Dolitskaya, OA
    Malysheva, TY
    Chesnokova, GV
    Kim, AS
    [J]. RUSSIAN METALLURGY, 1999, (03): : 22 - 26
  • [24] CFD modeling of sintering phenomena during iron ore sintering
    Tan, PF
    Neuschütz, D
    [J]. MULTIPHASE PHENOMENA AND CFD MODELING AND SIMULATION IN MATERIALS PROCESSES, 2004, : 451 - 459
  • [25] PROGRESS IN SINTERING - EXPERIMENTS IN IRON ORE SINTERING REPORTED - QUALITY OF IRON ORE SINTER AS RELATED TO MOISTURE AND COKE CONTENT
    MORRISSEY, HA
    POWERS, RE
    [J]. JOURNAL OF METALS, 1954, 6 (04): : 447 - 449
  • [26] Iron Ore Sintering: Raw Materials and Granulation
    Fernandez-Gonzalez, D.
    Ruiz-Bustinza, I.
    Mochon, J.
    Gonzalez-Gasca, C.
    Verdeja, L. F.
    [J]. MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2017, 38 (01): : 36 - 46
  • [27] Modelling fuel combustion in iron ore sintering
    Zhao, Jia P.
    Loo, Chin E.
    Dukino, Rodney D.
    [J]. COMBUSTION AND FLAME, 2015, 162 (04) : 1019 - 1034
  • [28] LIMIT CONDITION FOR IRON-ORE SINTERING
    SATO, S
    [J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S109 - S109
  • [29] STUDY OF BIOMASS UTILISATION IN THE IRON ORE SINTERING
    Kieush, Lina
    Yaholnyk, Maksym
    Boyko, Maksym
    Koveria, Andrii
    Ihnatenko, Vladyslav
    [J]. ACTA METALLURGICA SLOVACA, 2019, 25 (01): : 55 - 64
  • [30] De novo synthesis in iron ore sintering
    Zhang, Mengmei
    Buekens, Alfons
    [J]. INTERNATIONAL JOURNAL OF ENVIRONMENT AND POLLUTION, 2016, 60 (1-4) : 111 - 135