EFFECTS OF SURFACE FINISHING OF STAINLESS-STEEL SHEETS ON FORMATION OF PLASMA-POLYMERIZED THIN-FILM

被引：0
|
作者：
MASUHARA, K
SAWAYA, K
HIRAOKA, K
KATO, R
机构：
[1] TOKYO INST POLYTECHNICS,TOKYO,JAPAN
[2] MURAOKA RUBBER RECLAIMING CO LTD,MURAOKA,JAPAN
来源：
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1995年 / 81卷 / 05期
关键词：
STAINLESS STEEL; PLASMA POLYMERIZATION; AC IMPEDANCE; PERFLUOROMETHYLCYCLOHEXANE (PFMCH);
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The relation between surface finishing of stainless steel sheets and formation of plasma polymerized thin film of Perfluoromethylcyclohexane (PFMCH) was investigated by methods of EPMA and A.C. impedance analysis. By observation of EPMA, homogenious and thin film formed by plasma polymerization on the surface of SUS304BA was obtained, but on the surface of SUS3042D, thinner film was formed at the boundary of crystalline than on the surface of crystalline. A.C. impedance analysis showed that the value of A.C. impedance oi SUS304BA was higher than that of SUS3042D, and it is assumed that in the case of SUS3042D, the thickness of the film formed by plasma polymerization on the surface of crystalline was about ten times that of the boundary of crystalline.
引用
收藏
页码：553 / 558
页数：6
相关论文
共 50 条
  • [41] Surface and Bulk Structure of Thin Spin Coated and Plasma-Polymerized Polystyrene Films
    Fahmy, Alaa
    Mix, Renate
    Schoenhals, Andreas
    Friedrich, Joerg
    PLASMA CHEMISTRY AND PLASMA PROCESSING, 2012, 32 (04) : 767 - 780
  • [42] Formation of thin coloured film on stainless steel
    Gupta, GS
    ADVANCES IN COATINGS TECHNOLOGIES FOR SURFACE ENGINEERING, 1996, : 169 - 179
  • [43] NADH sensing using a carbon nanotube electrode reinforced with a plasma-polymerized thin film
    Matsui, Yasunori
    Hoshlno, Tatsuya
    Yoshizawa, Masahiro
    Muguruma, Hitoshi
    ELECTROCHEMISTRY, 2008, 76 (08) : 610 - 613
  • [44] EFFECTS OF SUBSTRATE SURFACE-ROUGHNESS ON MORPHOLOGY OF PLASMA-POLYMERIZED ETHYLENE
    NIINOMI, M
    KOBAYASH.H
    BELL, AT
    SHEN, M
    JOURNAL OF APPLIED POLYMER SCIENCE, 1974, 18 (07) : 2199 - 2203
  • [45] AN OPTIMIZED PREPARATION PROCESS OF STAINLESS-STEEL SUBSTRATES AND THEIR APPLICATION TO THIN-FILM HIGH-PRESSURE SENSORS
    GARCIAALONSO, A
    HUIZTI, X
    CASTANO, E
    OBIETA, I
    GRACIA, FJ
    SENSORS AND ACTUATORS A-PHYSICAL, 1993, 37-8 : 703 - 707
  • [46] THE THICKNESS EFFECT OF SiOX LAYER IN CIGS THIN-FILM SOLAR CELLS FABRICATED ON STAINLESS-STEEL SUBSTRATE
    Chung, Y. D.
    Cho, D. H.
    Han, W. S.
    Park, N. M.
    Lee, K. S.
    Oh, S. Y.
    Kim, J.
    35TH IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE, 2010, : 3401 - 3402
  • [47] THERMALLY STIMULATED SHORT-CIRCUITED CURRENT FROM PLASMA-POLYMERIZED POLYACRYLONITRILE THIN-FILM SANDWICHED BETWEEN ALUMINUM ELECTRODES
    MOHANACHANDRAN, K
    SATHIANANDAN, K
    JOURNAL OF APPLIED PHYSICS, 1982, 53 (02) : 1136 - 1140
  • [48] INFLUENCE OF BRIGHT ANNEALING ON COLORED FILM FORMATION ON STAINLESS-STEEL
    NAKAMURA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S499 - S499
  • [49] Welding of thin stainless-steel sheets using a QCW green laser source
    Haddad, E.
    Poggenburg, F.
    Haeusler, A.
    Olowinsky, A.
    SCIENTIFIC REPORTS, 2024, 14 (01)
  • [50] Welding of thin stainless-steel sheets using a QCW green laser source
    E. Haddad
    F. Poggenburg
    A. Häusler
    A. Olowinsky
    Scientific Reports, 14
12345