FLOW CHARACTERISTICS OF BUBBLE COLUMN WITH PERFORATED DRAFT TUBE - EFFECTS OF EQUIPMENT DIMENSIONS AND GAS DISPERSION

被引：17

作者：

BANDO, Y ^{[1
]}

NISHIMURA, M ^{[1
]}

SOTA, H ^{[1
]}

TOYODA, K ^{[1
]}

SUZUKI, S ^{[1
]}

IDOTA, A ^{[1
]}

机构：

[1] NIPPON SHARYO SEIZO LTD,NAGOYA 45691,JAPAN

来源：

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN | 1992年 / 25卷 / 01期

关键词：

CHEMICAL REACTOR; DRAFT TUBE; FLOW PATTERN; MIXING TIME; GAS HOLDUP; INTERFACIAL AREA;

D O I：

10.1252/jcej.25.49

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The effects of equipment dimensions and gas dispersion on the flow characteristics of a bubble column with perforated draft tube were experimentally examined. Gas was dispersed into the inner section of the draft tube or into the annular section between the column and the draft tube. Under various combinations of column diameter and diameter and length of the draft tube, the flow pattern was observed and the liquid mixing time, gas holdup and specific gas-liquid interfacial area were measured. In either gas dispersion, gas and liquid radially flowed through holes in the draft tube, and large bubbles were subdivided into small ones. Gas dispersion into the inner section was more effective in shortening the liquid mixing time. The liquid mixing time was shortened by increasing the ratio of height/column diameter, and was most shortened at a diameter ratio of draft tube/column of about 0.6. Gas dispersion into the annular section was effective in increasing the gas holdup and the interfacial area. The interfacial area was also increased by decreasing the characteristic length of the gas dispersion section.

引用

页码：49 / 54

页数：6

共 50 条

[41] MASS-TRANSFER IN BUBBLE SLURRY COLUMN WITH STATIC MIXER IN DRAFT TUBE
GASPILLO, PAD
GOTO, S
[J]. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1991, 24 (05) : 680 - 682
[42] MASS-TRANSFER AND REACTION IN BUBBLE COLUMN SLURRY REACTOR WITH DRAFT TUBE
GOTO, S
MATSUMOTO, Y
GASPILLO, P
[J]. CHEMICAL ENGINEERING COMMUNICATIONS, 1989, 85 : 181 - 191
[43] SIZE OF BUBBLES AND LIQUID CIRCULATION IN A BUBBLE COLUMN WITH A DRAFT TUBE AND SIEVE PLATE
MIYAHARA, T
HAMAGUCHI, M
SUKEDA, Y
TAKAHASHI, T
[J]. CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1986, 64 (05): : 718 - 725
[44] Air Dispersion and Bubble Characteristics in a Downflow Flotation Column
Zhu, Hongzheng
Lopez Valdivieso, Alejandro
Zhu, Jinbo
Min, Fanfei
Song, Shaoxian
Corona Arroyo, Mario Alberto
[J]. MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2019, 40 (03): : 224 - 229
[45] GAS HOLDUP BEHAVIOR IN A TALL BUBBLE COLUMN WITH PERFORATED PLATE DISTRIBUTORS
TSUCHIYA, K
NAKANISHI, O
[J]. CHEMICAL ENGINEERING SCIENCE, 1992, 47 (13-14) : 3347 - 3354
[46] BUBBLE AND GAS HOLDUP CHARACTERISTICS IN A BUBBLE COLUMN OF CMC SOLUTION
MOK, YS
KIM, YH
KIM, SY
[J]. KOREAN JOURNAL OF CHEMICAL ENGINEERING, 1990, 7 (01) : 31 - 39
[47] CRITICAL GAS VELOCITY REQUIRED FOR COMPLETE SUSPENSION OF SOLID PARTICLES IN SOLID-SUSPENDED BUBBLE COLUMN WITH DRAFT TUBE
KOIDE, K
HORIBE, K
KAWABATA, H
ITO, S
[J]. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1984, 17 (04) : 368 - 374
[48] Gas Holdup Characteristics in a Tapered Bubble Column
Zhang, Kai
Zhao, Yulong
Zhang, Bijiang
[J]. INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2003, 1
[49] Bubble and frictional characteristics of gas-liquid Taylor flow in capillary tube
College of Energy Engineering, Zhejiang University, Hangzhou
Zhejiang
310027, China
不详
Zhejiang
310027, China
[J]. Huagong Xuebao, 3 (942-948):
[50] THE EFFECT OF STATIC MIXER ON MASS-TRANSFER IN DRAFT TUBE BUBBLE COLUMN AND IN EXTERNAL LOOP COLUMN
GOTO, S
GASPILLO, PD
[J]. CHEMICAL ENGINEERING SCIENCE, 1992, 47 (13-14) : 3533 - 3539

← 1 2 3 4 5 →