Study on Spray and Exhaust Emission Characteristics of DME-Biodiesel Blended Fuel in Compression Ignition Engine

被引:4
|
作者
Cha, Junepyo [1 ]
Park, Su Han [1 ]
Lee, Chang Sik [1 ]
Park, Sung Wook [1 ]
机构
[1] Hanyang Univ, Dept Mech Engn, Seoul, South Korea
关键词
Biodiesel; Dimethyl-Ether; Spray Characteristic; Combustion Characteristic; Emission Characteristic;
D O I
10.3795/KSME-B.2011.35.1.067
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The purpose of this study is to investigate experimentally the spray-atomization and combustion-emission characteristics of biodiesel-DME blended fuel. In this study, two types of test fuels pure biodiesel (BD100) and blended fuel (B-DME20) were used, and the spray and combustion characteristics of different fuel compositions were analyzed. DME constitutes 20% and biodiesel constitutes 80% (by mass fraction) of the blended fuel. The overall spray characteristics, spray tip penetration, and cone angle were evaluated using frozen spray images. In addition, the combustion and emission characteristics were analyzed on the basis of the evaluated data for a single-cylinder CI engine with common-rail injection system. It was revealed that the injection profiles of both the test fuels for a given injection pressure showed similar trends. However, the injection profiles of the blended fuel (B-DME20) indicated shorter ignition delay than those of biodiesel.
引用
收藏
页码:67 / 73
页数:7
相关论文
共 50 条
  • [41] Performance and Emission Characteristics of Biodiesel-Butanol Blended Fuel in LHR Engine
    Muthukumarasamy, S.
    Arun, S.
    Amirthalingam, P.
    Yogesh, P.
    Baradhan, P.
    JOURNAL OF APPLIED FLUID MECHANICS, 2018, 11 : 1 - 5
  • [42] Experimental investigation on the performance, combustion and exhaust emission characteristics of a compression-ignition engine fueled with cottonseed oil biodiesel/diethyl ether/diesel fuel blends
    Yesilyurt, Murat Kadir
    Aydin, Mustafa
    ENERGY CONVERSION AND MANAGEMENT, 2020, 205
  • [43] Combustion and emission characteristics investigation of diesel-ethanol-biodiesel blended fuels in a compression-ignition engine and benefit analysis
    Tongroon, Manida
    Saisirirat, Peerawat
    Suebwong, Amornpoth
    Aunchaisri, Jirasak
    Kananont, Mongkon
    Chollacoop, Nuwong
    FUEL, 2019, 255
  • [44] Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20)
    Park, Sungyong
    Kim, Hwanam
    Choi, Byungchul
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (09) : 2555 - 2564
  • [45] Emission characteristics of exhaust gases and nanoparticles from a diesel engine with biodiesel-diesel blended fuel (BD20)
    Sungyong Park
    Hwanam Kim
    Byungchul Choi
    Journal of Mechanical Science and Technology, 2009, 23 : 2555 - 2564
  • [46] Applicability of dimethyl ether (DME) in a compression ignition engine as an alternative fuel
    Park, Su Han
    Lee, Chang Sik
    ENERGY CONVERSION AND MANAGEMENT, 2014, 86 : 848 - 863
  • [47] Impact of DME-biodiesel, diesel-biodiesel and diesel fuels on the combustion and emission reduction characteristics of a CI engine according to pilot and single injection strategies
    Roh, Hyun Gu
    Lee, Donggon
    Lee, Chang Sik
    JOURNAL OF THE ENERGY INSTITUTE, 2015, 88 (04) : 376 - 385
  • [48] COMBUSITON AND EMISSION ANALYSIS OF OXYGENATED MUSTARD OIL BIODIESEL WITH EXHAUST GAS RECIRCULATION IN COMPRESSION IGNITION ENGINE
    Govindaraj, Elavarasan
    Narayanan, Sethuraman
    Duraisamy, Karthikeyan
    IIOAB JOURNAL, 2020, 11 (04) : 9 - 15
  • [49] A Study on Performance, Combustion and Emission Characteristics of Compression Ignition Engine Using Fish Oil Biodiesel Blends
    Ramesha, D.K.
    Thimmannachar, Rajiv K.
    Simhasan, R.
    Nagappa, Manjunath
    Gowda, P.M.
    Journal of The Institution of Engineers (India): Series C, 2012, 93 (03) : 195 - 201
  • [50] Performance and emission characteristics of preheated and blended thumba vegetable oil in a compression ignition engine
    Jain, Narayan Lal
    Soni, S. L.
    Poonia, M. P.
    Sharma, Dilip
    Srivastava, Anmesh K.
    Jain, Hardik
    APPLIED THERMAL ENGINEERING, 2017, 113 : 970 - 979