A MODEL STUDY OF RESIDENCE TIME OF METAL DROPLETS IN THE SLAG IN BOF STEELMAKING

被引：35
|
作者：
HE, QL
STANDISH, N
机构：
[1] Department of Materials Engineering, The University of Wollongong, Wollongong
来源：
ISIJ INTERNATIONAL | 1990年 / 30卷 / 05期
关键词：
droplets; residence time; steelmaking;
D O I：
10.2355/isijinternational.30.356
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Residence time of metal droplets generated by an oxygen jet impinging on molten bath surface in the slag was investigated in a 3-D two phase (mercury/glycerine) model. The residence time (τ = Q2/q1) was obtained from measurements of the amount of emulsified mercury in glycerine at steady state (Q2) and the drop generation rate (q1). It has been found that the mean residence time increases with increasing top gas flow rate and decreases with increasing bottom gas flow rate. Also, it increases at first and then decreases with increasing lance height. Maximum mean residence time was achieved at a certain lance height. © 1990, The Iron and Steel Institute of Japan. All rights reserved.
引用
收藏
页码：356 / 361
页数：6
相关论文
共 50 条
  • [21] Model for prediction of oxygen required in BOF steelmaking
    Wang, Z.
    Liu, Q.
    Xie, F. M.
    Wang, B.
    Wang, B.
    Lu, X. C.
    Fu, G. Q.
    IRONMAKING & STEELMAKING, 2012, 39 (03) : 228 - 233
  • [22] Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process
    Qiang Li
    Mingming Li
    Shibo Kuang
    Zongshu Zou
    Metallurgical and Materials Transactions B, 2015, 46 : 1494 - 1509
  • [23] Component controlling model in BOF steelmaking process
    Gong, Wei
    Jiang, Zhou-Hua
    Zheng, Wan
    Chen, Nian-You
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2002, 23 (12): : 1155 - 1157
  • [24] A Novel Optic Senor for Real-time Metal Analysis in the BOF Steelmaking Process
    Zhang, Meng
    Chen, Yanru
    Xu, Lingfei
    Wang, Yongqing
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1, 2, 2011, 156-157 : 1594 - 1597
  • [25] Dependence of Temperature and Slag Composition on Dephosphorization at the First Deslagging in BOF Steelmaking Process
    Zhou, Chao-gang
    Li, Jing
    Shi, Cheng-bin
    Yu, Wen-tao
    Zhang, Zhi-ming
    Liu, Zhi-ming
    Deng, Chang-fu
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2016, 35 (04) : 433 - 440
  • [26] Influence of Converter Slag on Decomposition Behavior of Limestone During BOF Steelmaking Process
    Lu, Hua
    Li, Chenxiao
    Mao, Wenwen
    Li, Hong
    8TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2017, : 713 - 724
  • [27] A new approach for the study of slag-metal interface in steelmaking
    Beskow, K
    Dayal, P
    Björkvall, J
    Nzotta, M
    Sichen, D
    IRONMAKING & STEELMAKING, 2006, 33 (01) : 74 - 80
  • [28] Study on Slopping Prevention in the BOF Steelmaking Process
    Ni, Peiyuan
    Haglund, Teodor
    Ersson, Mikael
    STEEL RESEARCH INTERNATIONAL, 2017, 88 (08)
  • [29] Kinetic study of droplet swelling in BOF steelmaking
    Chen, E.
    Coley, K. S.
    IRONMAKING & STEELMAKING, 2010, 37 (07) : 541 - 545
  • [30] A MODEL INVESTIGATION ON EMULSIFICATION OF METAL DROPLETS IN THE BASIC OXYGEN STEELMAKING PROCESSES
    TURNER, G
    JAHANSHAHI, S
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (09) : 734 - 739
12345