A MODEL STUDY OF RESIDENCE TIME OF METAL DROPLETS IN THE SLAG IN BOF STEELMAKING

被引：35
|
作者：
HE, QL
STANDISH, N
机构：
[1] Department of Materials Engineering, The University of Wollongong, Wollongong
来源：
ISIJ INTERNATIONAL | 1990年 / 30卷 / 05期
关键词：
droplets; residence time; steelmaking;
D O I：
10.2355/isijinternational.30.356
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Residence time of metal droplets generated by an oxygen jet impinging on molten bath surface in the slag was investigated in a 3-D two phase (mercury/glycerine) model. The residence time (τ = Q2/q1) was obtained from measurements of the amount of emulsified mercury in glycerine at steady state (Q2) and the drop generation rate (q1). It has been found that the mean residence time increases with increasing top gas flow rate and decreases with increasing bottom gas flow rate. Also, it increases at first and then decreases with increasing lance height. Maximum mean residence time was achieved at a certain lance height. © 1990, The Iron and Steel Institute of Japan. All rights reserved.
引用
收藏
页码：356 / 361
页数：6
相关论文
共 50 条
  • [1] Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking
    Bernhard Mitas
    Ville-Valtteri Visuri
    Johannes Schenk
    Metallurgical and Materials Transactions B, 2023, 54 : 1938 - 1953
  • [2] Modeling the Residence Time of Metal Droplets in Slag During BOF Steelmaking
    Mitas, Bernhard
    Visuri, Ville-Valtteri
    Schenk, Johannes
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2023, 54 (04): : 1938 - 1953
  • [3] Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking
    Geoffrey Brooks
    Yuhua Pan
    Ken Subagyo
    Metallurgical and Materials Transactions B, 2005, 36 : 525 - 535
  • [4] Modeling of trajectory and residence time of metal droplets in slag-metal-gas emulsions in oxygen steelmaking
    Brooks, G
    Pan, YH
    Subagyo
    Coley, K
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2005, 36 (04): : 525 - 535
  • [5] SLAG-METAL EMULSIONS AND THEIR IMPORTANCE IN BOF STEELMAKING
    MEYER, HW
    PORTER, WF
    SMITH, GC
    SZEKELY, J
    JOURNAL OF METALS, 1968, 20 (07): : 35 - &
  • [6] A MODEL STUDY OF DROPLET GENERATION IN THE BOF STEELMAKING
    HE, QL
    STANDISH, N
    ISIJ INTERNATIONAL, 1990, 30 (04) : 305 - 309
  • [7] Residence time of metal droplets in slag-metal-gas emulsions through top gas blowing
    Subagyo
    Brooks, GA
    Coley, KS
    CANADIAN METALLURGICAL QUARTERLY, 2005, 44 (01) : 119 - 129
  • [8] A MATHEMATICAL MODEL OF CRITICAL JET HEIGHTS CAUSING DROPLETS SPLASHING IN BOF STEELMAKING
    Xu, D.
    Zheng, B.
    Guo, L. X.
    Pang, H. X.
    METALURGIJA, 2022, 61 (02): : 335 - 337
  • [9] Distribution and enrichment of phosphorus in solidified BOF steelmaking slag
    Wu, X. R.
    Wang, P.
    Li, L. S.
    Wu, Z. J.
    Chen, R. H.
    IRONMAKING & STEELMAKING, 2011, 38 (03) : 185 - 188
  • [10] SLAG FORMATION IN LARGE-SCALE BOF STEELMAKING
    KREIJGER, PJ
    BOOM, R
    CANADIAN METALLURGICAL QUARTERLY, 1982, 21 (04) : 339 - 345
12345