INVESTIGATION OF CRACK-PROPAGATION DURING CONTACT BY A FINITE-ELEMENT METHOD

被引:15
|
作者
OLZAK, M
STUPNICKI, J
WOJCIK, R
机构
关键词
D O I
10.1016/0043-1648(91)90065-3
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents a numerical method, based on the finite element approach, for the analysis of stress states in cracks during contact. The problem is considered to be two-dimensional, but the method also allows three-dimensional cases to be solved. The investigations concern the contact between a steel roller and a rectangular steel block with cracks of known geometry, i.e. surface-breaking cracks perpendicular to the contact surface and oblique to it, and cracks parallel to the surface located at various depths. Different configurations of load relative to the crack are considered which correspond to quasi-static rolling of the roller over the surface of the block. Normal and tangential loads are applied. As results, the changes in crack shape during rolling are presented. Diagrams of the tangential forces during contact in the following stages of rolling are shown. Finally, stress-intensity factors K(I) and K(II) are calculated and presented on plots vs. the position of the load axis relative to the crack. In conclusion, existing hypotheses concerning crack propagation during contact are confirmed, and new hypotheses are presented.
引用
收藏
页码:229 / 240
页数:12
相关论文
共 50 条
  • [41] FINITE-ELEMENT METHOD FOR NONLINEAR-WAVE PROPAGATION
    KAWAKAMI, I
    AIZAWA, M
    HARADA, K
    SAITO, H
    [J]. JOURNAL OF THE PHYSICAL SOCIETY OF JAPAN, 1985, 54 (02) : 544 - 554
  • [42] PROPAGATION ANALYSIS OF CHIROWAVEGUIDES USING THE FINITE-ELEMENT METHOD
    SVEDIN, JAM
    [J]. IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1990, 38 (10) : 1488 - 1496
  • [43] FINITE-ELEMENT METHOD FOR ELASTIC WAVE-PROPAGATION
    SERON, FJ
    SANZ, FJ
    KINDELAN, M
    BADAL, JI
    [J]. COMMUNICATIONS IN APPLIED NUMERICAL METHODS, 1990, 6 (05): : 359 - 368
  • [44] AN ELECTRICAL METHOD OF MEASURING CRACK LENGTH DURING CRACK-PROPAGATION TESTS OF POLYMERS
    SERRANO, AM
    WELSCH, GE
    GIBALA, R
    [J]. POLYMER ENGINEERING AND SCIENCE, 1982, 22 (15): : 934 - 936
  • [45] THE FINITE-ELEMENT METHOD APPLIED TO OCEAN ACOUSTIC PROPAGATION
    MURPHY, JE
    CHINBING, SA
    [J]. JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1987, 81 : S9 - S9
  • [46] A multiscale extended finite element method for crack propagation
    Guidault, P. -A.
    Allix, O.
    Champaney, L.
    Cornuault, C.
    [J]. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2008, 197 (05) : 381 - 399
  • [47] An enriched finite element method for dynamic crack propagation
    Chen, H
    Belytschko, T
    [J]. IUTAM SYMPOSIUM ON ANALYTICAL AND COMPUTATIONAL FRACTURE MECHANICS OF NON-HOMOGENEOUS MATERIALS, PROCEEDINGS, 2002, 97 : 187 - 196
  • [48] Application of the Extended Finite Element Method in Crack Propagation
    [J]. 1600, Cailiao Daobaoshe/ Materials Review (31):
  • [49] SOLUTION OF CONTACT THERMOELASTOPLASTIC PROBLEMS BY THE FINITE-ELEMENT METHOD
    NOVIKOV, NV
    LEVITAS, VI
    IDESMAN, AV
    [J]. DOPOVIDI AKADEMII NAUK UKRAINSKOI RSR SERIYA A-FIZIKO-MATEMATICHNI TA TECHNICHNI NAUKI, 1985, (01): : 27 - 32
  • [50] A FINITE-ELEMENT SOLUTION METHOD FOR CONTACT PROBLEMS WITH FRICTION
    CHANDRASEKARAN, N
    HAISLER, WE
    GOFORTH, RE
    [J]. INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1987, 24 (03) : 477 - 495