PLANE-STRAIN CRACK-TIP FIELDS FOR PRESSURE-SENSITIVE DILATANT MATERIALS

Plane-strain crack-tip stress and strain fields are presented for materials exhibiting pressure-sensitive yielding and plastic volumetric deformation. The yield criterion is described by a linear combination of the effective stress and the hydrostatic stress, and the plastic dilatancy is introduced by the normality flow rule. The material hardening is assumed to follow a power-law relation. For small pressure sensitivity, the plane-strain mode I singular fields are found in a separable form similar to the HRR fields (Hutchinson, 1968a, b; Rice and Rosengren, 1968). The angular distributions of the fields depend on the material-hardening exponent and the pressure-sensitivity parameter. The low-hardening solutions for different degrees of pressure sensitivity are found to agree remarkably with the corresponding perfectly-plastic solutions. An important aspect of the effects ofpressure-sensitive yielding and plastic dilatancy on the crack-tip fields is the lowering of the hydrostatic stress and the effective stress directly ahead of the crack tip, which may contribute to the experimentally-observed enhancement of fracture toughness in some ceramic and polymeric composite materials. © 1990 by ASME.