DIRECT MEASUREMENTS OF DISPLACEMENTS IN THE INNER ROLLER SPAN OF 4-POINT-BENDING CREEP TESTS

被引：0

作者：

FETT, T ^{[1
]}

KELLER, K ^{[1
]}

MARTIN, G ^{[1
]}

ROSENFELDER, O ^{[1
]}

机构：

[1] UNIV KARLSRUHE,INST ZUVERLASSIGKEIT & SCHADENSKUNDE MASCHINENBAU,W-7500 KARLSRUHE,GERMANY

来源：

JOURNAL OF TESTING AND EVALUATION | 1991年 / 19卷 / 04期

关键词：

CREEP; DISPLACEMENT MEASUREMENTS; HOT-PRESSED SILICON NITRIDE; HPSN; AL2O3;

D O I：

暂无

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Creep tests on ceramic materials are often performed in four-point-bending. With conventional procedures of evaluating such tests a number of assumptions must be made to allow the calculation of the displacements in the inner roller span-the range of the constant bending moment-from displacement measurements containing the part between the outer and the inner rollers where the bending moment changes linearly from zero to its maximum value. A test apparatus is described that allows direct measurements in the interesting part of the bending specimen. Creep curves obtained with different methods are compared.

引用

页码：334 / 337

页数：4

共 50 条

[31] Microstructure and high temperature 4-point bending creep of sol-gel derived mullite ceramics
Ivankovic, H
Tkalcec, E
Rein, R
Schmidt, H
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (09) : 1637 - 1646
[32] FRACTURE STRENGTH AND MODE OF SHEARING AND 4-POINT BENDING TESTS FOR SI3N4 JOINTS
ENOKI, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S734 - S734
[33] Four Point Bending Fatigue Tests of Forged Ti 6Al 4V
Oberwinkler, Bernd
Riedler, Martin
Leitner, Heinz
Javidi, Ataollah
MATERIALS TESTING, 2009, 51 (09) : 580 - 586
[34] Initial results of local strength analysis of a fiber concrete plate by 4-point bending tests
Goidyk, Oksana
Herrmann, Heiko
13TH INTERNATIONAL CONFERENCE MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (MBMST 2019), 2019, : 306 - 310
[35] Effects of adherends’ misalignment on the strength of single-lap joints under 3-point and 4-point bending tests
Andrea Corrado
Wilma Polini
The International Journal of Advanced Manufacturing Technology, 2022, 123 : 3819 - 3829
[36] Effects of adherends' misalignment on the strength of single-lap joints under 3-point and 4-point bending tests
Corrado, Andrea
Polini, Wilma
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (11-12): : 3819 - 3829
[37] Experimental assessment of CFRP reinforced wooden beams by 4-point bending tests and photoelastic coating technique
Ludomir J. Jankowski
Jerzy Jasieńko
Tomasz Piotr Nowak
Materials and Structures, 2010, 43 : 141 - 150
[38] Experimental assessment of CFRP reinforced wooden beams by 4-point bending tests and photoelastic coating technique
Jankowski, Ludomir J.
Jasienko, Jerzy
Nowak, Tomasz Piotr
MATERIALS AND STRUCTURES, 2010, 43 (1-2) : 141 - 150
[39] Comparison between modulus of elasticity values calculated using 3 and 4 point bending tests on wooden samples
Brancheriau L.
Bailleres H.
Guitard D.
Wood Science and Technology, 2002, 36 (05) : 367 - 383
[40] FLEXURAL FAILURE MECHANISMS AND GLOBAL STRESS PLANE FOR UNIDIRECTIONAL COMPOSITES SUBJECTED TO 4-POINT BENDING TESTS
SHIH, GC
EBERT, LJ
COMPOSITES, 1986, 17 (04): : 309 - 320

← 1 2 3 4 5 →