INTERSTITIAL PRECIPITATION IN FE-CR-AL ALLOYS

被引:19
|
作者
SPEAR, WS [1 ]
POLONIS, DH [1 ]
机构
[1] UNIV WASHINGTON,DEPT MAT SCI & ENGN,SEATTLE,WA 98195
关键词
D O I
10.1007/BF02652289
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Two separate stages of precipitation have been identified during the aging of ternary Fe18Cr3Al and Fe18Cr5Al alloys at temperatures in the vicinity of 475-degrees-C. The first stage involves the formation of interstitial precipitates resulting from C and N impurities; the second and slower stage is the formation of the Cr-rich alpha' phase. Transmission electron microscopy (TEM) results show that carbonitride precipitation occurs preferentially at dislocations, stacking faults, and grain boundaries, and also uniformly through the matrix. Aging for times in excess of 400 hours at 475-degrees-C promotes coarsening of the heterogeneous precipitates and dissolution of the uniformly distributed matrix particles. A resistometric analysis shows that the kinetics of the initial stages of precipitation can be described by a (time)2/3 relation. This kinetic behavior is explained in terms of stress-assisted diffusion in the highly stressed matrix resulting from coherency strains accompanying carbonitride precipitation. Experimental values of the activation energy for the first stage reaction correlate closely with those reported for the interstitial diffusion of C and N in alpha iron.
引用
收藏
页码:1135 / 1146
页数:12
相关论文
共 50 条
  • [11] Damping capacity of the Fe-Cr-Al based alloys
    Lin, RR
    Cao, MZ
    Yang, R
    PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 261 - 264
  • [12] Initial Oxidation of Fe-Al and Fe-Cr-Al Alloys: Cr as an Alumina Booster
    Heinonen, M. H.
    Kokko, K.
    Punkkinen, M. P. J.
    Nurmi, E.
    Kollar, J.
    Vitos, L.
    OXIDATION OF METALS, 2011, 76 (3-4): : 331 - 346
  • [13] AQUEOUS CORROSION PROPERTIES OF FE-AL AND FE-CR-AL ALLOYS
    HODGSON, PD
    METALS FORUM, 1982, 5 (02): : 99 - 108
  • [14] Atomistic Study of Surfaces and Interfaces of Fe-Cr and Fe-Cr-Al Alloys
    Kokko, K.
    Granroth, S.
    Heinonen, M. H.
    Perala, R. E.
    Kilpi, T.
    Kukk, E.
    Punkkinen, M. P. J.
    Nurmi, E.
    Ropo, M.
    Kuronen, A.
    Vitos, L.
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING VII, 2013, 762 : 728 - +
  • [15] Growth rates of alumina scales on Fe-Cr-Al alloys
    Quadakkers, WJ
    Naumenko, D
    Wessel, E
    Kochubey, V
    Singheiser, L
    OXIDATION OF METALS, 2004, 61 (1-2): : 17 - 37
  • [16] PREPARATION AND PROPERTIES OF SOME ODS FE-CR-AL ALLOYS
    WILSON, FG
    KNOTT, BR
    DESFORGES, CD
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1978, 9 (02): : 275 - 282
  • [17] Microstructural Evolution in Fe-Cr-Al Alloys under Irradiation
    Toyota, Kodai
    Hashimoto, Naoyuki
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2018, 82 (05) : 147 - 152
  • [18] EMBRITTLEMENT OF Fe-Cr-Al ALLOYS AND EFFECT OF Y ADDITION
    LI Bei WU Shuangxia LI Dianchen Baotou Research Institute of Rare Earth Ministry of Metallurgical Industry
    Acta Metallurgica Sinica(English Letters), 1993, (02) : 129 - 135
  • [19] Interatomic potentials and defect properties of Fe-Cr-Al alloys
    Liao, Xichuan
    Gong, Hengfeng
    Chen, Yangchun
    Liu, Guangdong
    Liu, Tong
    Shu, Rui
    Liu, Zhixiao
    Hu, Wangyu
    Gao, Fei
    Jiang, Chao
    Deng, Huiqiu
    JOURNAL OF NUCLEAR MATERIALS, 2020, 541
  • [20] SOME PHYSICOCHEMICAL PROPERTIES OF LIQUID FE-CR-AL ALLOYS
    LEVIN, ES
    AYUSHINA, GD
    RUSSIAN METALLURGY, 1972, (02): : 72 - 76