Crystallographic characterization of pseudoelastic phase transformation in Cu-13.1Al-4.0Ni (wt.%) single crystal high temperature shape memory alloy using neutron diffraction

被引:0
|
作者
Kannarpady, Ganesh K. [1 ]
Brown, Don [2 ]
Bhattacharyya, Abhijit [1 ]
Vogel, Sven [2 ]
Pulnev, Sergei [3 ]
机构
[1] Univ Arkansas, Dept Appl Sci, Smart Mat & MEMS Lab, 2801 South Univ,ETAS 575, Little Rock, AR 72204 USA
[2] Los Alamos Natl Lab, Mat Sci & Technol Div, Los Alamos, NM 87545 USA
[3] Ioffe Physicotech Inst, Dept Solid State Phys, St Petersburg, Russia
基金
美国国家科学基金会;
关键词
CuAlNi single crystal; In situ neutron diffraction; Phase transformation; Stress-temperature phase diagram;
D O I
10.1080/10238160802442710
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
This paper reports neutron diffraction experiments on high temperature Cu-13.1Al-4.0Ni (wt.%) shape memory alloy single crystals. The Cu-13.1%Al-4%Ni (wt.%) single crystal wires having nominal dimensions of 2.0 mm (diameter) and 100 mm (length) were subjected to tensile load at room temperature and at 175 degrees C (well above the austenitic finish temperature). Diffraction patterns were acquired at various stress levels. The growth and decay of different variants during the (beta(1)(1)) 18R monoclinic martensite reorientation under load were identified. Neutron diffraction results at 175 and 200 degrees C were used to study the biased martensitic variant formation during the (beta(1)) cubic austenite to (beta(1)(1)) 18R monoclinic martensite transformation under load. The observed results are correlated with stress-overall strain data obtained from experiments carried out at different test temperatures in an Instron machine with a high temperature environmental chamber.
引用
收藏
页码:249 / 258
页数:10
相关论文
共 38 条
  • [31] Effects of quenched-in vacancies on the reverse martensitic phase transformation temperature of the Cu-11.9Al-2.5Mn(wt%) shape memory alloy studied by internal friction
    Wang Qing-Zhou
    Lu Dong-Mei
    Cui Chun-Xiang
    Han Fu-Sheng
    ACTA PHYSICA SINICA, 2008, 57 (11) : 7083 - 7087
  • [32] Effects of quenched-in vacancies on the reverse martensitic phase transformation temperature of the Cu-11.9Al-2.5Mn(wt%) shape memory alloy studied by internal friction
    Wang, Qing-Zhou
    Lu, Dong-Mei
    Cui, Chun-Xiang
    Han, Fu-Sheng
    Wuli Xuebao/Acta Physica Sinica, 2008, 57 (11): : 7083 - 7087
  • [33] Effect of Aging on the Structure and Transformation Behavior of Cu-12Al-3.5Ni-0.7Ti-0.05RE High Temperature Shape Memory Alloy
    Dalvand, Pegah
    Raygan, Shahram
    Lopez, Gabriel A.
    Melendez, Mariano B.
    Chernenko, Volodymyr A.
    METALS AND MATERIALS INTERNATIONAL, 2020, 26 (09) : 1354 - 1365
  • [34] Microstructure characterization and effect of thermal cycling and ageing on vanadium-doped Cu–Al–Ni–Mn high-temperature shape memory alloy
    Y. Gao
    M. Zhu
    J. K. L. Lai
    Journal of Materials Science, 1998, 33 : 3579 - 3584
  • [35] Microstructure characterization and effect of thermal cycling and ageing on vanadium-doped Cu-Al-Ni-Mn high-temperature shape memory alloy
    Gao, Y
    Zhu, M
    Lai, JK
    JOURNAL OF MATERIALS SCIENCE, 1998, 33 (14) : 3579 - 3584
  • [36] Experimental and microstructural characterization of simultaneous creep, plasticity and phase transformation in Ti50Pd40Ni10 high-temperature shape memory alloy
    Kumar, Parikshith K.
    Lagoudas, Dimitris C.
    ACTA MATERIALIA, 2010, 58 (05) : 1618 - 1628
  • [37] In Situ Neutron Diffraction Analyzing Stress-Induced Phase Transformation and Martensite Elasticity in [001]-Oriented Co49Ni21Ga30 Shape Memory Alloy Single Crystals
    Reul A.
    Lauhoff C.
    Krooß P.
    Gutmann M.J.
    Kadletz P.M.
    Chumlyakov Y.I.
    Niendorf T.
    Schmahl W.W.
    Shape Memory and Superelasticity, 2018, 4 (01) : 61 - 69
  • [38] Effect of Aging on the Structure and Transformation Behavior of Cu–12Al–3.5Ni–0.7Ti–0.05RE High Temperature Shape Memory Alloy
    Pegah Dalvand
    Shahram Raygan
    Gabriel A. López
    Mariano B. Meléndez
    Volodymyr A. Chernenko
    Metals and Materials International, 2020, 26 : 1354 - 1365