FLOW CHARACTERISTICS OF BUBBLE-COLUMN WITH PACKED PERFORATED DRAFT TUBE

被引：4

作者：

BANDO, Y ^{[1
]}

NISHIMURA, M ^{[1
]}

WATANABE, Y ^{[1
]}

SATO, A ^{[1
]}

MIWA, M ^{[1
]}

KURAISHI, M ^{[1
]}

KAWASE, N ^{[1
]}

IDOTA, A ^{[1
]}

机构：

[1] NIPPON SHARYO LTD,NAGOYA 45691,JAPAN

来源：

KAGAKU KOGAKU RONBUNSHU | 1993年 / 19卷 / 03期

关键词：

CHEMICAL REACTOR; BUBBLE COLUMN; PERFORATED DRAFT TUBE; PACKING; GAS HOLDUP; INTERFACIAL AREA; LIQUID MIXING TIME;

D O I：

10.1252/kakoronbunshu.19.489

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

To improve bubble column performance, a bubble column with packed perforated draft tube was proposed. Net rings having relatively small flow resistance were used as packings and the dimensions of the perforated draft tube and the net ring were varied. The flow pattern was observed, and the gas holdup, gas-liquid interfacial area and liquid mixing time were measured. By packing the net rings in the perforated draft tube, ''bubble subdivision by packings'' occurred in addition to ''bubble subdivision by perforated wall''. The draft tube diameter, pore diameter, fractional free area and opening of net ring had the optimum values for the gas holdup and gas-liquid interfacial area. When the optimum draft tube diameter was used, the gas holdup and gas-liquid interfacial area were almost equal to those of the packed bubble column. The liquid mixing time was much shorter than those of standard and packed bubble columns. The COD removal was almost equal to that of the packed bubble column, and the present column was expected to be applied to a waste water treatment.

引用

页码：489 / 495

页数：7

共 50 条

[21] Semianalytical Bubble-Flow Models for the Development of a Novel Bubble-Column Simulator
Coetzee, Waldo
Coetzer, Roelof L. J.
Rawatlal, Randhir
[J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (21) : 7398 - 7409
[22] LIQUID CIRCULATION IN A DRAFT-TUBE BUBBLE COLUMN
JONES, AG
[J]. CHEMICAL ENGINEERING SCIENCE, 1985, 40 (03) : 449 - 462
[23] BIOLOGICAL NITROGEN REMOVAL IN A BUBBLE COLUMN WITH A DRAFT TUBE
HANO, T
MATSUMOTO, M
KURIBAYASHI, K
HATATE, Y
[J]. CHEMICAL ENGINEERING SCIENCE, 1992, 47 (13-14) : 3737 - 3744
[24] SIMULATION OF AN INDUSTRIAL BUBBLE-COLUMN REACTOR WITH EMPHASIS ON REAL FLOW
HERTWIG, K
SCHMIDT, R
NAGEL, G
[J]. INTERNATIONAL CHEMICAL ENGINEERING, 1978, 18 (04): : 582 - 585
[25] SUPERFICIAL RATE OF BUBBLE BREAKUP IN A BUBBLE-COLUMN
YAMASHITA, F
[J]. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1994, 27 (05) : 682 - 685
[26] GAS HOLDUPS AND BUBBLE CHARACTERISTICS IN A BUBBLE-COLUMN OPERATED AT HIGH-TEMPERATURE
CHABOT, J
DELASA, HI
[J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1993, 32 (11) : 2595 - 2601
[27] LIQUID-SOLID MASS-TRANSFER IN A BATCH-PACKED BUBBLE-COLUMN
ZARRAA, MA
ELABD, MZ
ELTAWIL, YA
FARAG, HA
SEDAHMED, GH
[J]. CHEMICAL ENGINEERING JOURNAL AND THE BIOCHEMICAL ENGINEERING JOURNAL, 1994, 54 (01): : 51 - 55
[28] FLOW STUDIES ON A BUBBLE-COLUMN CASCADE REACTOR WITH UNIDIRECTIONAL FLOW OF GAS AND LIQUID
BLASS, E
KOCH, KH
[J]. CHEMIE INGENIEUR TECHNIK, 1972, 44 (15) : 913 - &
[29] SOLUBILITY OF OZONE INTO WATER IN A BUBBLE-COLUMN
MIYAHARA, T
HIROKAWA, M
UEDA, M
YOSHIDA, K
[J]. KAGAKU KOGAKU RONBUNSHU, 1994, 20 (04) : 497 - 503
[30] Model simulates bubble-column reactor
不详
[J]. HYDROCARBON PROCESSING, 2000, 79 (08): : 28 - 28

← 1 2 3 4 5 →