FABRICATION OF Al/Al2O3 FGM ROTATING DISC

被引：10
|
作者：
Sanuddin, A. B. [1 ]
Ali, Aidy
Hanim, M. A. Azmah [1 ]
机构：
[1] Univ Putra Malaysia, Dept Mech & Mfg Engn, Fatigue & Fracture Res Grp, Serdang 43400, Selangor, Malaysia
来源：
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING | 2012年 / 5卷
关键词：
Functionally graded materials; aluminium; alumina; rotating disc;
D O I：
10.15282/ijame.5.2012.8.0049
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This study presents a method of fabricating a disc made of Al/Al2O3 functionally graded materials (FGM), using a powder metallurgy manufacturing process. The aim is to develop a processing method for a rotating disc made of FGM, by stacking the slurry, layer by layer in a radial direction. A three-layer functionally graded material of Al/Al2O3 is fabricated with compositions of 10, 20, 30 vol.% Al2O3. The ceramic composition increases from the discs inner (centre) to the outer. The combination of these materials can offer the ability to withstand high temperature conditions whilst maintaining strength in extreme environments.
引用
收藏
页码：622 / 629
页数：8
相关论文
共 50 条
  • [31] Fabrication of AIN/Al2O3 coatings via atmospheric reactive plasma nitriding of Al2O3 powders
    Shahien, Mohammed
    Yamada, Motohiro
    Yasui, Toshiaki
    Fukumoto, Masahiro
    [J]. ADVANCED ENGINEERING CERAMICS AND COMPOSITES, 2011, 484 : 166 - 171
  • [32] Low cost Ti(Al,O)/Al2O3 and TixAly/Al2O3 composites
    Zhang, DL
    Cai, ZH
    Newby, M
    [J]. MATERIALS TECHNOLOGY, 2003, 18 (02) : 94 - 98
  • [33] A novel fabrication of Al2O3/SiC composite via surface 3-aminopropyltriethoxysilane tailored Al2O3
    Xu, Yuping
    Xin, Yunzi
    Shirai, Takashi
    [J]. JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2022, 130 (06) : 390 - 393
  • [34] Quantitative analysis of Al2O3 particles in Al3Ti/Al2O3/Al composites
    Swiderska-Sroda, A
    Wejrzanowski, T
    Kurzydlowski, KJ
    Wyrzykowski, JW
    [J]. MATERIALS CHARACTERIZATION, 2003, 51 (2-3) : 141 - 146
  • [35] A theoretical analysis of flexional bending of Al/Al2O3 S-FGM thick beams
    Ben-Oumrane, Sallai
    Abedlouahed, Tounsi
    Ismail, Mechab
    Mohamed, Bachir Bouiadjra
    Mustapha, Meradjah
    El Abbas, Adda Bedia
    [J]. COMPUTATIONAL MATERIALS SCIENCE, 2009, 44 (04) : 1344 - 1350
  • [36] Bond strength and microstructure investigation on Al2O3/Al/Al2O3 joints
    Ksiazek, M
    Sobczak, N
    Mikulowski, B
    Radziwilli, W
    Winiarski, B
    [J]. SURFACE AND INTERFACE ANALYSIS, 2004, 36 (08) : 673 - 676
  • [37] Oxidation of volatile organic compounds on Al2O3, Pd/Al2O3, and PdO/Al2O3 catalysts
    Cordi, EM
    Falconer, JL
    [J]. JOURNAL OF CATALYSIS, 1996, 162 (01) : 104 - 117
  • [38] Boron Emitter Passivation With Al2O3 and Al2O3/SiNx Stacks Using ALD Al2O3
    Richter, Armin
    Benick, Jan
    Hermle, Martin
    [J]. IEEE JOURNAL OF PHOTOVOLTAICS, 2013, 3 (01): : 236 - 245
  • [39] RADIAL PROFILES IN PT/AL2O3, RE/AL2O3, AND PT-RE/AL2O3
    DEMIGUEL, SR
    SCELZA, OA
    CASTRO, AA
    BARONETTI, GT
    ARDILES, DR
    PARERA, JM
    [J]. APPLIED CATALYSIS, 1984, 9 (03): : 309 - 315
  • [40] Wet milling of Fe/Al/Al2O3 and Fe2O3/Al/Al2O3 powder mixtures
    Schicker, S
    García, DE
    Gorlov, I
    Janssen, R
    Claussen, N
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (10) : 2607 - 2612
12345