CONTROL OF TEMPER EMBRITTLEMENT IN NI-CR-MO-V STEEL BY COMBINING INTERCRITICAL AND LOW-TEMPERATURE AUSTENITIZING HEAT-TREATMENTS

被引：12
|
作者：
WOODFORD, DA [1 ]
STEPIEN, RW [1 ]
机构：
[1] GE,DIV GAS TURBINE,PROGRAM DEV MANAGER,SCHENECTADY,NY 12301
来源：
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 1980年 / 11卷 / 12期
关键词：
D O I：
10.1007/BF02655114
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
引用
收藏
页码：1951 / 1963
页数：13
相关论文
共 50 条
  • [41] Strain visualization of growing short fatigue cracks in the heat-affected zone of a Ni-Cr-Mo-V steel welded joint: Intergranular cracking and crack closure
    Liu, Shi-Dong
    Zhu, Ming-Liang
    Zhou, Hai-Bo
    Wan, Di
    Xuan, Fu-Zhen
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2019, 178
  • [42] EFFECT OF CATHODIC POTENTIAL ON CORROSION FATIGUE CRACK GROWTH-RATES OF A NI-CR-MO-V TURBINE DISK STEEL IN ROOM-TEMPERATURE CAUSTIC ENVIRONMENT
    RUNGTA, R
    BEGLEY, JA
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1980, 11 (05): : 821 - 830
  • [43] Influence of heats, heat-treatments and strain control mode on high temperature fatigue lives of 2.25Cr-1Mo steels for boiler and pressure vessels
    Yamaguchi, K
    Kimura, M
    Kobayashi, K
    Hayakawa, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2004, 90 (10): : 841 - 845
  • [44] IMPROVEMENT OF LOW-TEMPERATURE TOUGHNESS IN WELD METAL MADE OF 9CR-1MO-V STEEL BY GTAW METHOD
    Nakano, Masakatsu
    Tanaka, Tomohiro
    Abe, Masamitsu
    Nakatani, Mitsuyosi
    Terasaki, Hidenori
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2019, VOL 6B, 2019,
  • [45] LOW-TEMPERATURE MECHANICAL-PROPERTIES OF QUENCHED AND TEMPERED 0.4C-NI-CR-MO STEEL AFTER CONTROLLED ROLLING
    TOMITA, Y
    MATERIALS SCIENCE AND TECHNOLOGY, 1988, 4 (07) : 613 - 620
  • [46] Influence of Various Heat Treatments on Hardness and Impact Strength of Uddeholm Balder: Cr-Mo-V-Ni Novel Steel Used for Engine Construction
    Mazuro, Pawel
    Pienkowska, Julia
    Rostek, Ewa
    MATERIALS, 2021, 14 (17)
  • [47] EFFECT OF APPLIED POTENTIAL ON CORROSION FATIGUE CRACK GROWTH-RATES OF A NI-CR-MO-V TURBINE DISK STEEL IN A ROOM-TEMPERATURE 12M NAOH SOLUTION
    RUNGTA, R
    BEGLEY, J
    CORROSION, 1979, 35 (12) : 544 - 550
  • [48] Effect of low temperature intercritical heat-treatment on stable crack growth behavior in 13% Cr-4% Ni martensitic stainless steel multipass weldments
    Foroozmehr, Fayaz
    Bocher, Philippe
    ENGINEERING FRACTURE MECHANICS, 2020, 240
  • [49] Study on Low-Cycle Fatigue Behavior and Life Prediction of Cr-Ni-Mo-V Gun Steel at Room Temperature and 600 °C
    Zhao, Chao
    Jia, Xiaobin
    Zhao, Caiyan
    Bai, Shaobin
    Huang, Yanli
    Zhang, Qing
    Zhang, Jian
    Hu, Yongping
    Huang, Jinfeng
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2025, 48 (01) : 118 - 131
  • [50] Microstructures and mechanical properties of surface and center of carburizing 23Cr2Ni2Si1Mo steel subjected to low-temperature austempering
    Wang, Yanhui
    Yang, Zhinan
    Zhang, Fucheng
    Wu, Dongdong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 670 : 166 - 177
12345