A MODEL FOR GAS-SOLID STRATIFIED FLOW IN HORIZONTAL DENSE-PHASE PNEUMATIC CONVEYING

被引：15
|
作者：
HONG, J
SHEN, YS
LIU, SL
机构：
[1] Department of Transport Phenomena, University of Science and Technology Beijing, Beijing
来源：
POWDER TECHNOLOGY | 1993年 / 77卷 / 02期
关键词：
D O I：
10.1016/0032-5910(93)80047-E
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
On the basis of understanding the interaction mechanism between suspension and sliding bed, a physical model has been developed for gas-solid stratified flow with high solids/gas mass flowrate ratio (so-called solids loading) in horizontal pneumatic conveying. It was found that the predicted pressure drop from the developed model coincides within +/-30% with the experimental data for conveying medium size sand and fine lime in an 8 m long pipe with a diameter of 20 mm under a wide range of solids loading from 30 to 200. Also, predictions for phase diagram, flow configuration and velocity of sliding bed seem to be more reasonable from the present model than previous models.
引用
收藏
页码：107 / 114
页数：8
相关论文
共 50 条
  • [41] Application of nonlinear dynamics analysis to gas-solid flow system in horizontal pneumatic conveying of plastic pellets
    Alshahed, Osamh S.
    Kaur, Baldeep
    Bradley, Michael S. A.
    Armour-Chelu, David
    POWDER TECHNOLOGY, 2023, 428
  • [42] Influence of carbonaceous powders on flow characteristics of dense-phase pneumatic conveying at high pressure
    Liang Cai
    Shen Liu
    Xu Pan
    Xu Guiling
    Chen Xiaoping
    Zhao Changsui
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2014, 58 : 121 - 130
  • [43] Ultrasonic Attenuation of Gas-Solid Flow Pneumatic Conveying Fly Ash
    Duan, Guang Bin
    Pan, Hong Li
    Wang, Yong
    Liu, Zong Ming
    INDUSTRIAL DESIGN AND MECHANICS POWER II, 2013, 437 : 335 - 338
  • [44] Solid-Mass Flow-Rate Prediction in Dense-Phase Pneumatic Conveying of Pulverized Coal by a Venturi Device
    Lu, Haifeng
    Guo, Xiaolei
    Liu, Yi
    Li, Peng
    Gong, Xin
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2016, 55 (39) : 10455 - 10464
  • [45] Effect of drag models on simulation of dense-phase pneumatic conveying in horizontal pipe under high pressure
    Zhou H.
    Xiong Y.
    Xiong, Yuanquan (yqxiong@seu.edu.cn), 1600, Southeast University (50): : 496 - 506
  • [46] Study on the dense-phase pneumatic conveying of fly ash and process control
    Zhao, J
    Hu, SG
    Lu, HD
    Liu, ZM
    ICEMI'2003: PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON ELECTRONIC MEASUREMENT & INSTRUMENTS, VOLS 1-3, 2003, : 2256 - 2259
  • [47] Pressure drop prediction for horizontal dense-phase pneumatic conveying of pulverized coal associated with feeding to gasifier
    Guo, Xiaolei
    Lu, Wenxue
    Lu, Haifeng
    Cong, Xingliang
    Xie, Kai
    Liu, Haifeng
    Gong, Xin
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2013, 91 (12): : 2509 - 2514
  • [48] Dense-phase pneumatic conveying characteristics of blendings with petroleum coke and anthracite
    Hu J.
    Shen L.
    Liang C.
    Chen X.
    Xu G.
    Zhao C.
    Liang, Cai (liangc@seu.edu.cn), 2016, Central South University of Technology (47): : 2501 - 2506
  • [49] Dense-phase pneumatic conveying technology for highly explosive metal powders
    Wypych, P. W.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2008, 26 (01) : 15 - 22
  • [50] An Investigation into Modeling of Solids Friction for Dense-Phase Pneumatic Conveying of Powders
    Mallick, S. S.
    Wypych, P. W.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2010, 28 (01) : 51 - 66
12345