THE KINETICS OF THE INTERNAL NITRIDING OF FE-2 AT PCT AL-ALLOY

被引:66
|
作者
BIGLARI, MH
BRAKMAN, CM
MITTEMEIJER, EJ
VANDERZWAAG, S
机构
[1] Laboratory of Materials Science, Delft University of Technology, AL, Delft, 2628
关键词
D O I
10.1007/BF02649075
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The kinetics of the precipitation of aluminum nitride on internal nitriding the Fe-2 at. pct Al alloy was investigated for cold-rolled and recrystallized specimens exhibiting ''ideally weak'' interaction behavior of the solutes Al and N. The kinetic analysis was performed using mass-increase data obtained for thin foils (thickness less than or equal to 0.1 mm) upon nitriding in a NH3/H-2 gas mixture at temperatures in the range 803 to 853 K. Activation-energy analysis revealed that precipitation of AlN in the recrystallized specimens is associated with a Gibbs free energy barrier for the formation of a precipitate of critical size; the precipitation rate is controlled by both nucleation and growth. On the other hand, precipitation of AlN in the cold-rolled specimens occurs without a Gibbs free energy barrier for formation of a precipitate of critical size; the precipitation rate is controlled by growth with kinetics governed by volume diffusion of aluminum. Analysis of the total Gibbs free energy of formation of AlN in the alpha-Fe matrix showed that in the case of the recrystallized specimens, the formation of incoherent AlN precipitates with a hexagonal crystal structure is favored. In the case of the cold-rolled specimens, containing a high dislocation density, the formation of coherent AlN precipitates with cubic crystal structure is favored, at least in the beginning of precipitation.
引用
收藏
页码:765 / 776
页数:12
相关论文
共 50 条
  • [41] An Improved Model for FE Modeling and Simulation of Closed Cell Al-Alloy Foams
    Hasan, MD. Anwarul
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2010, 2010
  • [42] DISLOCATION-STRUCTURES IN A CYCLICALLY DEFORMED FE-25 CR-2 AL-ALLOY
    TJONG, SC
    HSIEH, IC
    HO, NJ
    ZEITSCHRIFT FUR METALLKUNDE, 1988, 79 (03): : 189 - 193
  • [43] Impact of plastic deformation on magnetoacoustic properties of Fe-2%Si alloy
    Piotrowski, L.
    Augustyniak, B.
    Chmielewski, M.
    Landgraf, F. J. G.
    Sablik, M. J.
    NDT & E INTERNATIONAL, 2009, 42 (02) : 92 - 96
  • [44] ELECTROMIGRATION IN 2-LEVEL INTERCONNECTS OF CU-ALLOY AND AL-ALLOY
    HU, CK
    LUTHER, B
    MATERIALS CHEMISTRY AND PHYSICS, 1995, 41 (01) : 1 - 7
  • [45] DISTRIBUTION OF ALUMINUM IN AN NI-2-PERCENT AL-ALLOY
    SONG, SH
    YUAN, ZX
    XU, TD
    YU, ZS
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1992, 11 (24) : 1678 - 1680
  • [46] Kinetics of internal oxidation of Cu−Al alloy plate
    Song Kexing
    Xing Jiandong
    Tian Baohong
    Liu Ping
    Dong Qiming
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005, 20 (1): : 13 - 16
  • [47] TEM Study on the Internal Oxidation and Nitriding of Dual Phase Fe–Mn–Al–C Alloy AfterNaCl-Induced Corrosion
    C.-J. Wang
    Y.-C. Chang
    Oxidation of Metals, 2003, 59 : 135 - 154
  • [48] THE EFFECT OF HIGH-TEMPERATURE SPUTTERING ON THE T1/2 DEPENDENCE OF SEGREGATION KINETICS IN AN AL-ALLOY
    DUPLESSIS, J
    VILJOEN, PE
    VANWYK, GN
    SURFACE SCIENCE, 1991, 244 (03) : 277 - 284
  • [49] THE KINETICS OF THE EUTECTOID DECOMPOSITION IN A ZN-22 WT-PERCENT AL-ALLOY
    RUSSEW, K
    TERZIEV, L
    BUDUROV, S
    ZEITSCHRIFT FUR METALLKUNDE, 1982, 73 (03): : 179 - 184
  • [50] Crystal Structure and Morphology of Mixed Cr1-x Al x N Nitride Precipitates: Gaseous Nitriding of a Fe-1.5 Wt Pct Cr-1.5 Wt Pct Al Alloy
    Clauss, A. R.
    Bischoff, E.
    Hosmani, S. S.
    Schacherl, R. E.
    Mittemeijer, E. J.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (08): : 1923 - 1934