EFFECT OF WELD POOL DEFORMATION ON WELD PENETRATION IN STATIONARY GAS TUNGSTEN ARC-WELDING

被引:0
|
作者
KIM, SD [1 ]
NA, SJ [1 ]
机构
[1] KOREA ADV INST SCI & TECHNOL,DEPT PROD ENGN,SEOUL 131,SOUTH KOREA
关键词
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The effect of weld pool surface deformation on weld joint penetration under the arc pressure has been studied in stationary gas tungsten arc welding (GTAW), by considering the four driving forces for weld pool convection: electromagnetic force, buoyancy force, aerodynamic drag force, and surface tension force at the weld pool surface. In the numerical simulation, difficulties associated with the irregular shape of the deformed weld pool surface and the moving liquid-solid interface have been successfully overcome by adopting a boundary-fitted coordinate system, which eliminates the analytical complexity there. This method also has the capacity to handle the time-dependent changing solution domain of the moving boundary problem and could be applied effectively to this transient weld pool development problem with the phase change condition and moving boundary, such as at the deformed weld pool surface and the liquid-solid interface.
引用
收藏
页码:S179 / S193
页数:15
相关论文
共 50 条
  • [11] Adaptive Modeling of the Weld Pool Geometry in Gas Tungsten Arc Welding
    Liu, YuKang
    Zhang, YuMing
    [J]. 2013 10TH IEEE INTERNATIONAL CONFERENCE ON NETWORKING, SENSING AND CONTROL (ICNSC), 2013, : 550 - 555
  • [12] Experimental determination of weld pool geometry in gas tungsten arc welding
    Gao, J
    Wu, C
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2001, 6 (05) : 288 - 292
  • [14] Effect of surfactant redistribution on weld pool shape during gas tungsten arc welding
    Winkler, C
    Amberg, G
    Inoue, H
    Koseki, T
    Fuji, M
    [J]. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2000, 5 (01) : 8 - 20
  • [15] Weld Penetration Control in Gas Tungsten Arc Welding (GTAW) Process
    Liu, YuKang
    Zhang, YuMing
    [J]. 39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 3842 - 3847
  • [16] Characterization of welding arc and weld pool formation in vacuum gas hollow tungsten arc welding
    Cho, D. W.
    Lee, S. H.
    Na, S. J.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2013, 213 (02) : 143 - 152
  • [17] Measurement and estimation of weld pool surface depth and weld penetration in pulsed gas metal arc welding
    Wang, Z.
    Zhang, Y.M.
    Wu, L.
    [J]. Welding Journal (Miami, Fla), 2010, 89 (06):
  • [18] Measurement and Estimation of Weld Pool Surface Depth and Weld Penetration in Pulsed Gas Metal Arc Welding
    Wang, Z.
    Zhang, Y. M.
    Wu, L.
    [J]. WELDING JOURNAL, 2010, 89 (06) : 117S - 126S
  • [19] Modeling of heat and fluid flow in weld pool by stationary gas tungsten arc - analytical study of penetration process in GTA welding (1)
    Hirata, Yoshinori
    Hirose, Shigeichi
    Ogaki, Shinji
    Asai, Yasuhiro
    Ohji, Takayoshi
    [J]. 2000, Japan Welding Soc, Tokyo, Japan (18):
  • [20] Weld penetration sensing in pulsed gas tungsten arc welding based on arc voltage
    Zhang Shiqi
    Hu Shengsun
    Wang Zhijiang
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 229 : 520 - 527