PREDICTION OF TEMPERATURE DISTRIBUTION IN ROLLING TIRES USING THE FINITE-ELEMENT METHOD

被引：0
|
作者：
DEHNERT, J
VOLK, H
机构：
来源：
KAUTSCHUK GUMMI KUNSTSTOFFE | 1992年 / 45卷 / 01期
关键词：
TIRE CALCULATION; FEM; TEMPERATURE CALCULATION; ROLLING RESISTANCE; STEADY-STATE ROLLING TIRE;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A steady-state rolling tire is idealized by a FEM calculation under inflation pressure, centrifugal load, and vertical loading. Dependent on the used materials the heat sources are determined from the calculated strain energy. Based on this the steady state temperature distribution within the tire cross-section is calculated by FEM. Comparisons with measurements show satisfactory agreement with the predictions. Some results are presented from parametric studies.
引用
收藏
页码：47 / 51
页数：5
相关论文
共 50 条
  • [1] MODELING OF TEMPERATURE DISTRIBUTION IN A BRAKE DRUM USING FINITE-ELEMENT METHOD
    RAO, VTVSR
    RAMASUBRAMANIAN, H
    SEETHARAMU, KN
    [J]. INDIAN JOURNAL OF TECHNOLOGY, 1989, 27 (09): : 417 - 424
  • [2] Analysis of stress distribution in caliber rolling by the energy method using finite-element division
    Komori, K
    Kato, K
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 117 (1-2) : 201 - 208
  • [3] PREDICTION OF SOIL STRESSES USING THE FINITE-ELEMENT METHOD
    RAPER, RL
    ERBACH, DC
    [J]. TRANSACTIONS OF THE ASAE, 1990, 33 (03): : 725 - 730
  • [4] Finite element modelling of rolling tires
    Nackenhorst, U
    Ziefle, M
    [J]. KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2005, 58 (06): : 322 - 326
  • [5] FINITE-ELEMENT METHOD IN ROLLING BEARING ENGINEERING
    GERLACH, HD
    [J]. BALL BEARING JOURNAL, 1973, (175): : 1 - 10
  • [6] APPLICATION OF FINITE-ELEMENT METHOD TO ROLLING BEARING
    NAGAI, Y
    KAWAHARA, K
    [J]. JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1987, 32 (05): : 335 - 338
  • [7] Prediction of rolling force and deformation in three-dimensional cold rolling by using the finite-element method and a neural network
    Lin, JC
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2002, 20 (11): : 799 - 806
  • [8] Prediction of Rolling Force and Deformation in Three-Dimensional Cold Rolling by Using the Finite-Element Method and a Neural Network
    J.C. Lin
    [J]. The International Journal of Advanced Manufacturing Technology, 2002, 20 : 799 - 806
  • [9] Stress Investigation on the Rolling Tires across the Speed Bump Using Finite Element Method
    Hidayat, Royan
    Pranoto, Sarwo Edy
    Tauviqirrahman, Mohammad
    Bayuseno, Athanasius P.
    [J]. 3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND TECHNOLOGY (ICAMST 2015), 2016, 1725
  • [10] ANALYSIS OF ROLLING OF ANGLES BY ENERGY METHOD USING FINITE-ELEMENT DIVISION
    KOMORI, K
    KATO, K
    MUROTA, T
    ENDO, J
    DOI, Y
    [J]. JSME INTERNATIONAL JOURNAL, 1987, 30 (262): : 574 - 580
12345