STRUCTURE FORMATION OF 50KHG SPRING STEEL DURING HEAT-TREATMENT IN ROLLING-MILL LINE

被引：0
|
作者：
IVASHCHENKO, VM
TRUKHANOV, VP
机构：
[1] Donetsk Polytechnic Inst, Russia
来源：
STEEL IN THE USSR | 1988年 / 18卷 / 10期
关键词：
Iron and Steel Metallography--Transformations - Rolling Mill Practice--Hot Rolling - Steel Heat Treatment--Optimization;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
An examination is made of the results of investigating structure formation in 50KhG chromium-manganese spring steel heat treated by combined schedules including preliminary interim water cooling with subsequent isothermal holding. The optimum heat treatment schedule was established, enabling a homogeneous ferrite-cementite mixture to be obtained over the cross-section of spring steel strip with a hardness not exceeding the standard requirements. Decarburization and scaling are reduced in this case.
引用
收藏
页码：469 / 470
页数：2
相关论文
共 30 条
  • [21] SOME PECULIARITIES OF STRUCTURE AND PROPERTIES FORMATION DURING HEAT-TREATMENT OF COPPER-ALLOYS WITH SHAPE MEMORY EFFECT
    KRAVCHENKO, MA
    FIZIKA METALLOV I METALLOVEDENIE, 1991, (03): : 201 - 203
  • [22] Formation and evolution of the interfacial structure in al/steel compound castings during solidification and heat treatment
    Bakke, Aina Opsal
    Arnberg, Lars
    Loland, Jan-Ove
    Jorgensen, Svein
    Kvinge, Jan
    Li, Yanjun
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 849 (849)
  • [23] The formation of the bainite structure during heat treatment of the rail steel (analogue J13052)
    Chertovskih, E. O.
    Gabets, A., V
    Gabets, D. A.
    Markov, A. M.
    Okolovich, G. A.
    Komarov, P. N.
    OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2016, (02): : 70 - 79
  • [24] INFLUENCE OF CARBON CONTENTS ON THE STRUCTURE FORMATION IN FE-3-PERCENT SI ALLOYS DURING DEFORMATION AND HEAT-TREATMENT
    PETROVA, TA
    TSEYTLIN, AM
    FIZIKA METALLOV I METALLOVEDENIE, 1984, 58 (01): : 149 - 153
  • [25] INFLUENCE OF TEMPERING TEMPERATURE IN HEAT-TREATMENT ON 12CR1MOV STEEL STRUCTURE STABILITY DURING PROCESS OF OPERATION
    BEREZINA, TG
    MINTS, II
    THERMAL ENGINEERING, 1971, 18 (04) : 70 - &
  • [26] NATURE OF COARSE PRECIPITATES OF ALPHA-PHASE IN TITANIUM-ALLOY STRUCTURE AND CONDITIONS OF THEIR FORMATION DURING DEFORMATION AND HEAT-TREATMENT
    SHAKHANOVA, GV
    BRUN, MY
    SOLDATENKO, IV
    FIZIKA METALLOV I METALLOVEDENIE, 1991, (04): : 133 - 137
  • [27] The formation of diamond-like carbon structure anchored in the nitrided layer of M50 steel during plasma-assisted thermochemical treatment
    Yao, Jiawei
    Yan, Fuyao
    Chen, Hongtao
    Chen, Baofeng
    Yan, Mufu
    Zhang, Yanxiang
    MATERIALS & DESIGN, 2022, 214
  • [28] Effect of Hot-Rolling and Heat-Treatment Conditions on the Structure and Mechanical and Technological Properties of Nitrogen-Bearing Austenitic Steel 05Kh22AG15N8M2F-Sh
    Bannykh, O. A.
    Blinov, V. M.
    Kostina, M. V.
    Blinov, E. V.
    Kalinin, G. Yu.
    RUSSIAN METALLURGY, 2006, (04): : 306 - 313
  • [29] Inspection of the Strength Characteristics and Heat-Treatment Quality of Ferromagnetic Articles According to Parameters of the Residual-Magnetization Hysteresis Loop during Their Local Magnetization and Magnetization Reversal in a Pulsed Magnetic Field with a Variable Amplitude: III. Steel 50ΧΓΦΑ
    V. F. Matyuk
    M. A. Mel'gui
    D. A. Pinchukov
    A. L. Lyubarets
    Russian Journal of Nondestructive Testing, 2005, 41 : 523 - 531
  • [30] Inspection of the strength characteristics and heat-treatment quality of ferromagnetic articles according to parameters of the residual-magnetization hysteresis loop during their local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude:: III.: Steel 50XΓΦA
    Matyuk, VF
    Mel'gui, MA
    Pinchukov, DA
    Lyubarets, AL
    RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 2005, 41 (08) : 523 - 531
123