CHEMICAL-DISTRIBUTION IN HIGH-SOLIDS PAINT OVERSPRAY AEROSOLS

被引:5
|
作者
DARCY, JB
CHAN, TL
机构
[1] Biomedical Science Department, General Motors Research Ijaboralories, Warren
来源
AMERICAN INDUSTRIAL HYGIENE ASSOCIATION JOURNAL | 1990年 / 51卷 / 03期
关键词
D O I
10.1080/15298669091369457
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The chemical composition of high-solids basecoat paint overspray aerosols was determined as a function of particle size. Detailed information on the chemical composition of the overspray aerosols is important in health hazard evaluation since the composition and distribtion within the airborne particles may differ significantly from the bulk paint material. This study was conducted in a typical down-draft paint booth equipped with air-atomized spray painting equipment. A fixed paint target was used to simulate typical overspray generation conditions and the aerosols were collected isokinetically with a seven-stage cascade impactor for size-fractionated analysis. The overspray aerosol from six paints consisted of organic paint binders with varying amounts of inorganic species as pigments or luster enhancers. These overspray aerosols had mass median aerodynamic diameters (MMAD) ranging from 2.9 to 9,7 µm. The size-fractionated paint samples collected on the impaction stages were analyzed by energy dispersive X-ray spectrometry on a scanning electron microscope (SEM-EDXRS) to identify the metallic elements. Atomic absorption spectrometry was used to determine the mass distribution of aluminum and iron as indicators of nonuniform distribution. Three of the aerosols containing aluminum were found to have bimodal distributions with most aluminum distributions having cumulative MMADs larger than the total aerosol. Iron in the aerosols was bimodal for three of the paints, with all samples having an overall iron MMAD less than or equal to the overspray aerosol MMAD. Analysis using ultraviolet spectrometry revealed that the organic compounds present in the size-fractionated particulate samples consisted of a single, polydispersed mode with an MMAD similar to that of the total overspray aerosol. The results of this study show that using the size distribution of the total overspray aerosol to estimate the respiratory tract penetration of an inorganic species can produce estimates which differ from those based on the chemical distribution of the species. © 1990, Taylor & Francis Group, LLC. All rights reserved.
引用
收藏
页码:132 / 138
页数:7
相关论文
共 50 条
  • [41] HIGH-SOLIDS TOMATO SHOWS PROMISE IN THE FIELD
    MARTINEAU, B
    OUTLOOK ON AGRICULTURE, 1995, 24 (02) : 133 - 133
  • [42] Laboratory method for high-solids countercurrent fermentations
    M. Kyle Ross
    Mark T. Holtzapple
    Applied Biochemistry and Biotechnology, 2001, 94 : 111 - 126
  • [43] Low-cure high-solids coating
    Egizio, J.
    Products Finishing (Cincinnati), 2001, 65 (07):
  • [44] SUCCESS OF WORLDS LONGEST HIGH-SOLIDS PIPELINE
    不详
    AUSTRALIAN CIVIL ENGINEERING, 1969, 10 (06): : 28 - &
  • [45] CHAIN EXTENDABLE OLIGOMERS FOR HIGH-SOLIDS COATINGS
    HOLUBKA, JW
    ACS SYMPOSIUM SERIES, 1985, 282 : 117 - 123
  • [46] HIGH-SOLIDS COATINGS BASED ON POLYURETHANE CHEMISTRY
    POTTER, TA
    SCHMELZER, HG
    BAKER, RD
    PROGRESS IN ORGANIC COATINGS, 1984, 12 (04) : 321 - 338
  • [47] Laboratory method for high-solids countercurrent fermentations
    Ross, MK
    Holtzapple, MT
    APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY, 2001, 94 (02) : 111 - 126
  • [48] CONTROLLING VISCOSITY OF HIGH-SOLIDS COATINGS.
    Soderstrom, Ric
    Products Finishing (Cincinnati), 1988, 52 (07): : 98 - 103
  • [49] DEVELOPMENTAL APPROACH TO HIGH-SOLIDS COATINGS.
    McKay, Gretchen L.
    Butler, James M.
    Ray, Charles J.
    Wolf, Richard E.
    High solids coatings, 1980, 5 (03): : 3 - 11
  • [50] USE OF ACETOACETYLATED MATERIALS IN HIGH-SOLIDS COATINGS
    WITZEMAN, JS
    CLEMENS, RJ
    BLOUNT, WW
    DELRECTOR, F
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1990, 200 : 220 - PMSE