THE PHENOMENON OF DURABILITY VARIABLE DIES FOR ALUMINUM EXTRUSION PROFILES

被引：0
|
作者：
Borowski, J. [1 ]
Wendland, J. [1 ]
机构：
[1] Met Forming Inst, Poznan, Poland
来源：
METALURGIJA | 2016年 / 55卷 / 02期
关键词：
aluminium; extrusion; nitriding; die; wear;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Extrusion dies are usually regenerated several times (min 4 times). The phenomenon of extended life after each regenerative nitriding process has not been explained. In this work, the regeneration process of dies used in the extrusion of aluminium profiles has been presented. In the article, it was sought to explain the cause of increased die durability after the third or fourth nitriding. Also in this work is presented an analysis of the influence of the parameters of gas nitriding with the ZeroFlow method on hardness of dies. Results were verified under industrial conditions at extrusion company, comparing the durability of the dies nitrided with the ZeroFlow method with so-far-used dies nitrided in the commercial way. An increase of the dies durability was achieved after a single ZeroFlow nitriding.
引用
收藏
页码：229 / 232
页数：4
相关论文
共 50 条
  • [31] Design and Experimental Assessment of Variable-Geometry Dies for Polymer Extrusion
    Li, Bingjue
    Myszka, David H.
    Murray, Andrew P.
    JOURNAL OF MECHANICAL DESIGN, 2018, 140 (01)
  • [32] Controlling Heat Balance in Hot Aluminum Extrusion by Additive Manufactured Extrusion Dies with Conformal Cooling Channels
    Hoelker, Ramona
    Jaeger, Andreas
    Ben Khalifa, Nooman
    Tekkaya, A. Erman
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2013, 14 (08) : 1487 - 1493
  • [33] Controlling heat balance in hot aluminum extrusion by additive manufactured extrusion dies with conformal cooling channels
    Ramona Hölker
    Andreas Jäger
    Nooman Ben Khalifa
    A. Erman Tekkaya
    International Journal of Precision Engineering and Manufacturing, 2013, 14 : 1487 - 1493
  • [34] Fem simulation of the whole circle of aluminum hot extrusion using circular dies with different extrusion angle
    Lontos, A.
    Bouzakis, K.-D.
    Demosthenous, G.
    Baldoukas, A.
    PROCEEDINGS OF THE 8TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS, VOL 4, 2006, : 607 - 612
  • [35] Non-isothermal viscoelastic simulations of extrusion through dies and prediction of the bending phenomenon
    Barakos, G
    Mitsoulis, E
    JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 1996, 62 (01) : 55 - 79
  • [36] Non-isothermal viscoelastic simulations of extrusion through dies and prediction of the bending phenomenon
    Univ of Ottawa, Ottawa, Canada
    J Non Newtonian Fluid Mech, 1 (55-79):
  • [37] Flow balancing in extrusion dies for thermoplastic profiles -: Part III:: Experimental assessment
    Nóbrega, JM
    Carneiro, OS
    Pinho, FT
    Oliveira, PJ
    INTERNATIONAL POLYMER PROCESSING, 2004, 19 (03) : 225 - 235
  • [38] Design of extrusion dies
    Limper, A
    Stieglitz, H
    KUNSTSTOFFE-PLAST EUROPE, 1999, 89 (02): : 52 - +
  • [39] Flow balancing in extrusion dies for thermoplastic profiles Part I:: Automatic design
    Nóbrega, JM
    Carneiro, OS
    Oliveira, PJ
    Pinho, FT
    INTERNATIONAL POLYMER PROCESSING, 2003, 18 (03) : 298 - 306
  • [40] Research on the CAE technology and optimization design method of extrusion dies for plastic profiles
    Zhao, Danyang
    Wang, Minjie
    Song, Mancang
    Liu, Bin
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2006, 17 (SUPPL.): : 189 - 192
12345