IOSIPESCU SHEAR CHARACTERIZATION OF POLYMERIC AND METAL MATRIX COMPOSITES

被引：33
|
作者：
PINDERA, MJ [1 ]
IFJU, P [1 ]
POST, D [1 ]
机构：
[1] VIRGINIA POLYTECH INST & STATE UNIV,DEPT ENGN SCI & MECH,BLACKSBURG,VA 24061
来源：
EXPERIMENTAL MECHANICS | 1990年 / 30卷 / 01期
关键词：
D O I：
10.1007/BF02322710
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper outlines the results of an experimental/analytical investigation of deformation and stress fields in the test section of graphite/epoxy and boron/aluminum Iosipescu specimens using high-resolution moiré interferometry and finite-element analysis. Very good correlation between experimental and analysis is demonstrated for the graphite/epoxy speciments. This, in turn, justifies the use of correction factors employed in the previous investigations to eliminate differences in the inital shear moduli obtained from 0-deg and 90-deg losipescu specimens. The significant discrepancies observed in the case of boron/aluminum specimens are attributed to localized yielding at the notch tips caused by the clamping action, the associated in-plane bending effects and changing boundary conditions due to slippage in the grips. © 1990 Society for Experimental Mechanics, Inc.
引用
收藏
页码：101 / 108
页数：8
相关论文
共 50 条
  • [21] Fiber pushout and interfacial shear in metal-matrix composites
    Koss, Donald A.
    Hellmann, John R.
    Kallas, M.Nabil
    JOM, 1993, 45 (03) : 34 - 37
  • [22] Measuring constitutive shear behavior of orthotropic composites and evaluation of the modified Iosipescu test
    Melin, L. Niklas
    Neumeister, Jonas M.
    COMPOSITE STRUCTURES, 2006, 76 (1-2) : 106 - 115
  • [23] STRUCTURE-PERFORMANCE MAPS OF POLYMERIC, METAL, AND CERAMIC MATRIX COMPOSITES
    CHOU, TW
    YANG, JM
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1986, 17 (09): : 1547 - 1559
  • [24] ANALYSIS OF THE IOSIPESCU SHEAR TEST AS APPLIED TO UNIDIRECTIONAL CARBON-FIBER REINFORCED COMPOSITES
    BROUGHTON, WR
    KUMOSA, M
    HULL, D
    COMPOSITES SCIENCE AND TECHNOLOGY, 1990, 38 (04) : 299 - 325
  • [25] Recycling of polymeric matrix composites
    Pinto, KNC
    Rossi, JL
    ADVANCED POWDER TECHNOLOGY III, 2003, 416-4 : 444 - 448
  • [26] POLYMERIC MATRIX COMPOSITES (PMC)
    KANE, RD
    MATERIALS PERFORMANCE, 1991, 30 (01) : 76 - 76
  • [27] The Polymeric Heterogeneous Matrix for Composites
    Muranov, Alexandr
    Malysheva, Galina
    Pilyugina, Anna
    ACMTAA 2012: PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON ADVANCED COMPOSITE MATERIALS AND TECHNOLOGIES FOR AEROSPACE APPLICATIONS, 2012, : 65 - 68
  • [28] Characterization of matrix damage in metal matrix composites under transverse loads
    Lee, J
    Mal, A
    COMPUTATIONAL MECHANICS, 1998, 21 (4-5) : 339 - 346
  • [29] Characterization of matrix damage in metal matrix composites under transverse loads
    J. Lee
    A. Mal
    Computational Mechanics, 1998, 21 : 339 - 346
  • [30] Polymeric composites for dentistry. I - Synthesis and characterization of a novel dental composite with polymeric matrix
    Momete, Daniela-Cristina
    Verne, Enrica
    Vitale-Brovarone, Chiara
    Malucelli, Giulio
    Sangermano, Marco
    Vasilescu, Dan-Sorin
    REVUE ROUMAINE DE CHIMIE, 2006, 51 (06) : 547 - 554
12345