共 50 条
- [41] DEFORMATION TWINNING IN AL-4.8 WT-PERCENT MGACTA METALLURGICA, 1988, 36 (07): : 1745 - 1754GRAY, GT
- [42] EFFECT OF STRUCTURE TRANSFORMATION ON THE TRANSIENT CREEP CHARACTERISTICS OF ZN-40 WT-PERCENT AL AND ZN-0.5 WT-PERCENT AL-ALLOYSPHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1985, 89 (02): : K157 - K162SAKR, MSABDELRAAHEIM, AEEELDALLY, AA
- [43] PRECIPITATION OF PROEUTECTOID CEMENTITE AND PEARLITE IN A FE-1.3 WT-PERCENT C-3.5 WT-PERCENT CU STEELJOURNAL OF METALS, 1984, 36 (12): : 73 - 73WASYNCZUK, JAFISHER, RMTHOMAS, G
- [44] Electrochemical fatigue sensor response to Ti-6 wt% Al-4 wt% V and 4130 steelPHILOSOPHICAL MAGAZINE, 2004, 84 (3-5) : 331 - 349Witney, ALi, YFWang, JWang, MZDeLuccia, JJLaird, C
- [45] STRESS-RELIEF CRACKING OF 9 WT-PERCENT CR STEELS CONTAINING 0-2 WT-PERCENT MOMATERIALS SCIENCE AND TECHNOLOGY, 1986, 2 (04) : 386 - 393HIPPSLEY, CABRIANT, CLEDWARDS, BC
- [46] CHARACTERIZATION OF STAGES DURING THE PRECIPITATION OF THE THETA-1-PHASE IN AN AL-4 WT-PERCENT CU ALLOYPHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1979, 52 (01): : K1 - &FOUQUET, FMERLE, PMERLIN, J
- [47] EFFECT OF PRE-COLD WORKING ON THE AGING CHARACTERISTICS OF THE AL-1.0 WT-PERCENT MN-0.28 WT-PERCENT FE ALLOYJOURNAL OF PHYSICS D-APPLIED PHYSICS, 1987, 20 (01) : 125 - 129KENAWY, MAGRAISS, GSAAD, GFAWZY, A
- [48] QUENCH RATE SENSITIVITY IN U-0.75 WT-PERCENT TIJOURNAL OF NUCLEAR MATERIALS, 1977, 67 (1-2) : 33 - 41ECKELMEYER, KHZANNER, FJ
- [49] A MICROSTRUCTURAL STUDY OF CO-20 WT-PERCENT CR-10 WT-PERCENT A1 USING APFIM AND TEMJOURNAL DE PHYSIQUE, 1986, 47 (C-7): : 245 - 249BURKE, MGCAOLA, JR
- [50] STRUCTURE AND PROPERTIES OF AN AL-5 WT-PERCENT MN-2.5 WT-PERCENT CR ALLOY PRODUCED BY HOT EXTRUSION OF RAPIDLY SOLIDIFIED POWDERINTERNATIONAL JOURNAL OF RAPID SOLIDIFICATION, 1986, 2 (01): : 55 - 61ARNBERG, LBACKMARK, UBACKSTROM, N