An Experimental Study on the Combustion and Emission Characteristics of the Early Injection in a Gasoline Direct Injection Engine Using Controlled Auto Ignition Combustion Method

被引:1
|
作者
Lee, Changhee
Choi, Youngjong
Lee, Kihyung
机构
关键词
CAI(Controlled Auto Ignition); Residual EGR; NVO (Negative Valve Overlap); Early Injection;
D O I
10.3795/KSME-B.2006.30.5.457
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Controlled auto ignition (CAI) combustion, also known as HCCI (homogeneous charge compression ignition), offers the potential to simultaneously improve fuel economy and reduce emission. CAI-combustion was achieved in a single cylinder gasoline DI engine, with a cylinder running in a CAI mode. Standard components were used the camshafts which had been modified in order to restrict the gas exchange process. The effects of air-fuel ratio, residual EGR rate and injection timing such as early injection and late injection on the attainable CAI combustion region were investigated. The effect that injection timings on factor such as start of combustion, combustion duration and heat release rate was also investigated. From results early injection caused the mixture to ignite earlier and burn more quickly due to the exothermic reaction during the recompression and gave rise to good mixing of the fuel-air.
引用
收藏
页码:457 / 464
页数:8
相关论文
共 50 条
  • [1] Managing controlled auto-ignition combustion by injection on a direct-injection gasoline engine
    Li, Y.
    Zhao, H.
    Brouzos, N.
    Leach, B.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2007, 221 (D9) : 1125 - 1137
  • [2] Combustion and emission analysis of the direct DME injection enabled and controlled auto-ignition gasoline combustion engine operation
    Zhang, H. F.
    Seo, K.
    Zhao, H.
    [J]. FUEL, 2013, 107 : 800 - 814
  • [3] LATE DIRECT FUEL INJECTION FOR REDUCED COMBUSTION RATES IN A GASOLINE CONTROLLED AUTO-IGNITION ENGINE
    Hunicz, Jacek
    Mikulski, Maciej
    Geca, Michal S.
    Kordos, Pawel
    Komsta, Henryk
    [J]. THERMAL SCIENCE, 2018, 22 (03): : 1299 - 1309
  • [4] Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine
    Kim, Kihyun
    Kim, Donghoon
    Jung, Yongjin
    Bae, Choongsik
    [J]. FUEL, 2013, 109 : 616 - 626
  • [5] Combustion Optimization for Jet Ignition Direct Injection Gasoline Engine
    Zhao, Ziqing
    Qi, Yunliang
    Tian, Ning
    Zhang, Yi
    Liu, Cong
    Yao, Yi
    Wang, Zhi
    [J]. Qiche Gongcheng/Automotive Engineering, 2021, 43 (11): : 1631 - 1637
  • [6] An experimental study on the combustion characteristics using the stratified charge compression ignition in a direction injection gasoline engine
    Lee, Kihyung
    Lee, Changhee
    [J]. JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING, 2006, 49 (03) : 864 - 868
  • [7] NUMERICAL STUDY OF ADVANCED COMPRESSION IGNITION AND COMBUSTION IN A GASOLINE DIRECT INJECTION ENGINE
    Kim, Sayop
    Kim, Joohan
    Shah, Ashish
    Pal, Pinaki
    Scarcelli, Riccardo
    Rockstroh, Toby
    Som, Sibendu
    Wu, Yunchao
    Lu, Tianfeng
    [J]. PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE FALL TECHNICAL CONFERENCE, 2019, 2020,
  • [8] Effects of Water Injection on Combustion Emission and Knock Characteristics of Turbocharged Direct Injection Gasoline Engine
    Wang, Junjun
    Yan, Fuwu
    Yan, Dong
    Zhang, Wenlong
    Zhang, Guoqing
    Zhang, Jizhou
    Chen, Ziyi
    Wang, Yu
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2022, 23 (04) : 899 - 912
  • [9] Effects of Water Injection on Combustion Emission and Knock Characteristics of Turbocharged Direct Injection Gasoline Engine
    Junjun Wang
    Fuwu Yan
    Dong Yan
    Wenlong Zhang
    Guoqing Zhang
    Jizhou Zhang
    Ziyi Chen
    Yu Wang
    [J]. International Journal of Automotive Technology, 2022, 23 : 899 - 912
  • [10] Combustion and emission characteristics of a direct-injection gasoline engine using the MMT fuel additive gasoline
    Geng, Peng
    Zhang, Hui
    [J]. FUEL, 2015, 144 : 380 - 387