CONSTITUTIVE MODEL AND WAVE-EQUATIONS FOR LINEAR, VISCOELASTIC, ANISOTROPIC MEDIA

Rocks are far from being isotropic and elastic. Such simplifications in modeling the seismic response of real geological structures may lead to misinterpretations, or even worse, to overlooking useful information. It is useless to develop highly accurate modeling algorithms or to naively use amplitude information in inversion processes if the stress-strain relations are based on simplified theologies. Thus, an accurate description of wave propagation requires a theology that accounts for the anisotropic and anelastic behavior of rocks. This work presents a new constitutive relation and the corresponding time-domain wave equation to model wave propagation in inhomogeneous anisotropic and dissipative media. The theological equation includes the generalized Hooke's law and Boltzmann's superposition principle to account for anelasticity. The attenuation properties in different directions, associated with the principal axes of the medium, are controlled by four relaxation functions of viscoelastic type. A dissipation model that is consistent with rock properties is the general standard linear solid. This is based on a spectrum of relaxation mechanisms and is suitable for wavefield calculations in the time domain. One relaxation function describes the anelastic properties of the quasi-dilatational mode and the other three model the anelastic properties of the shear modes. The convolutional relations are avoided by introducing memory variables, six for each dissipation mechanism in the 3-D case, two for the generalized SN-wave equation, and three for the qP - qSV wave equation. Two-dimensional wave equations apply to monoclinic and higher symmetries. A plane analysis derives expressions for the phase velocity, slowness, attenuation factor, quality factor and energy velocity (wavefront) for homogeneous viscoelastic waves. The analysis shows that the directional properties of the attenuation strongly depend on the values of the elasticities. In addition, the displacement formulation of the 3-D wave equation is solved in the time domain by a spectral technique based on the Fourier method. The examples show simulations in a transversely-isotropic clayshale and phenolic (orthorhombic symmetry).