PRESSURE DURING CURING AND THE STRENGTH OF 2024, 2017A AND 1050 ALUMINIUM ALLOY SHEET ADHESIVE JOINTS

被引：8

作者：

Rudawska, Anna ^{[1
]}

机构：

[1] Lublin Univ Technol, Fac Mech Engn, Dept Prod Engn, Nadbystrzycka 36, PL-20618 Lublin, Poland

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2015年 / 9卷 / 26期

关键词：

adhesive joint strength; pressure; curing; aluminium alloys;

D O I：

10.12913/22998624/2371

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper is primarily devoted to one of adhesive curing process parameters - pressure applied during curing, as well as the type of adhesive. The aim of this work is to determine the influence of pressure applied during curing process of aluminium alloy sheet adhesive joints on the strength of adhesive joints formed with two epoxy adhesives: Loctite 9484 and Loctite 9466. Three types of aluminium alloy sheets were tested, namely AW 2024, AW 2017A and AW 1050, applied in many branches of engineering. During formation of adhesive joints, other conditions remained unchanged, and surface preparation operations included mechanical processing and degreasing.

引用

页码：96 / 103

页数：8

共 26 条

[1] Microstructure of friction stir welded joints of 2017A aluminium alloy sheets
Mroczka, K.
Dutkiewicz, J.
Pietras, A.
[J]. JOURNAL OF MICROSCOPY, 2010, 237 (03) : 521 - 525
[2] Strength of 2017 aluminium alloy stud joints by friction welding
[J]. Morikawa, K., 2013, Taylor and Francis Ltd. (27)
[3] Influence of nanoporous structure on mechanical strength of aluminium and aluminium alloy adhesive structural joints
Spadaro, C.
Dispenza, C.
Sunseri, C.
[J]. JOURNAL OF PHYSICS-CONDENSED MATTER, 2006, 18 (33) : S2007 - S2018
[4] MECHANICAL PROPERTIES OF BUTT WELDED JOINTS IN HIGH STRENGTH ALUMINIUM ALLOY SHEET
ADAMS, JH
HARTGROV.T
[J]. BRITISH WELDING JOURNAL, 1966, 13 (03): : 119 - &
[5] Effects of applied pressure and temperature during curing operation on the strength of tubular single-lap adhesive joints
Kim, JK
Lee, DG
[J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2004, 18 (01) : 87 - 107
[6] Effects of applied pressure and temperature during curing operation on the strength of tubular single-lap adhesive joints
[J]. Kim, J.K., 1600, Taylor and Francis Ltd. (18):
[7] Influence of Physical Modification of the Adhesive Composition on the Strength Properties of Aerospace Aluminum Alloy Sheet Adhesive Joints
Miturska-Baranska, Izabela
Rudawska, Anna
Doluk, Elzbieta
[J]. MATERIALS, 2022, 15 (21)
[8] The Influence of Sandblasting Process Parameters of Aerospace Aluminium Alloy Sheets on Adhesive Joints Strength
Miturska-Baranska, Izabela
Rudawska, Anna
Doluk, Elzbieta
[J]. MATERIALS, 2021, 14 (21)
[9] Characteristics and strength of hybrid friction stir welding and adhesive bonding lap joints for AA2024-T3 aluminium alloy
Wang, Yue
Chai, Peng
Ma, He
Zhang, Yanhua
[J]. JOURNAL OF ADHESION, 2022, 98 (04): : 325 - 347
[10] Effects of different surface cleaning procedures on the superficial morphology and the adhesive strength of epoxy coating on aluminium alloy 1050
Golru, S. Sharifi
Attara, M. M.
Ramezanzadeh, B.
[J]. PROGRESS IN ORGANIC COATINGS, 2015, 87 : 52 - 60

← 1 2 3 →