AXIAL DISTRIBUTION OF SOLID HOLDUPS IN BINARY SOLIDS CIRCULATING FLUIDIZED-BEDS

被引:25
|
作者
BAI, DR [1 ]
NAKAGAWA, N [1 ]
SHIBUYA, E [1 ]
KINOSHITA, H [1 ]
KATO, K [1 ]
机构
[1] GUNMA UNIV,DEPT BIOL & CHEM ENGN,KIRYU,GUNMA 376,JAPAN
关键词
CIRCULATING FLUIDIZED BEDS; BINARY SOLIDS; SOLID HOLDUP DISTRIBUTION;
D O I
10.1252/jcej.27.271
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The hydrodynamic behavior of binary solids circulating fluidized beds was examined in terms of axial distributions of apparent solid holdup as well as of fine and coarse solid holdups. Experiments were carried out in two circulating fluidized beds of 3 m in height and 97 mm and 150 mm in diameter, using FCC catalysts with a mean diameter of 69.7 mum as the fine particles and 321-mum silica sand and 633-mum activated alumna as coarse particles. The influences of gas velocity solids circulation rate, loading ratio of coarse particles and bed diameter on the axial distributions of apparent holdup and of fine and coarse particles holdups were investigated. Comparisons were made of the axial distributions of solids holdups both in the presence and absence of coarse particles. It was found that the addition of coarse (or dense) particles results in a significant variation in both the apparent and the fine particles holdups. In addition, the nonuniformity of the axial solid holdup distribution was found to vary with increasing loading ratio of coarse particles.
引用
收藏
页码:271 / 275
页数:5
相关论文
共 50 条
  • [1] SEGREGATION OF PARTICLES IN BINARY SOLIDS CIRCULATING FLUIDIZED-BEDS
    NAKAGAWA, N
    BAI, DR
    SHIBUYA, E
    KINOSHITA, H
    TAKARADA, T
    KATO, K
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 1994, 27 (02) : 194 - 198
  • [2] AXIAL MIXING OF SOLIDS IN TURBULENT FLUIDIZED-BEDS
    LEE, GS
    KIM, SD
    CHEMICAL ENGINEERING JOURNAL AND THE BIOCHEMICAL ENGINEERING JOURNAL, 1990, 44 (01): : 1 - 9
  • [3] AXIAL PRESSURE PROFILE IN CIRCULATING FLUIDIZED-BEDS
    WIRTH, KE
    CHEMIE INGENIEUR TECHNIK, 1988, 60 (07) : 572 - 573
  • [4] AXIAL-DISPERSION OF SOLIDS IN SPIRAL FLUIDIZED-BEDS
    PYDISETTY, Y
    KRISHNAIAH, K
    VARMA, YBG
    POWDER TECHNOLOGY, 1989, 59 (01) : 1 - 9
  • [5] SOLID MASS FLUXES IN CIRCULATING FLUIDIZED-BEDS
    HERB, B
    DOU, S
    TUZLA, K
    CHEN, JC
    POWDER TECHNOLOGY, 1992, 70 (03) : 197 - 205
  • [6] METHODS OF MEASURING AXIAL MIXING OF SOLIDS IN LIQUID SOLIDS FLUIDIZED-BEDS
    FLASCHEL, E
    METZDORF, C
    RENKEN, A
    CHEMIE INGENIEUR TECHNIK, 1987, 59 (06) : 494 - 496
  • [7] Hydrodynamics in gas-liquid-solids circulating fluidized beds with low solids holdups
    Liu, Jianhua
    Liu, Mingyan
    Hu, Zongding
    Huagong Xuebao/CIESC Journal, 2013, 64 (02): : 504 - 516
  • [8] Quantitative estimation of solids holdups at dense and dilute regions of circulating fluidized beds
    Natural Gas Technologies Center, 1350 Nobel Street, Boucherville, Que. J4B 5H3, Canada
    不详
    Powder Technol., 3 (183-190):
  • [9] Quantitative estimation of solids holdups at dense and dilute regions of circulating fluidized beds
    Bai, D
    Kato, K
    POWDER TECHNOLOGY, 1999, 101 (03) : 183 - 190
  • [10] CORRELATION OF AXIAL MIXING OF SOLIDS IN FLUIDIZED-BEDS BY A DISPERSION COEFFICIENT
    ESIN, A
    ALTUN, M
    POWDER TECHNOLOGY, 1984, 39 (02) : 241 - 244