FRICTIONAL FORCES BETWEEN STRAND AND MOLD IN THE CONTINUOUS-CASTING OF STEEL BILLETS WITH MOLD OIL LUBRICATION

被引：0

作者：

FORSTER, E ^{[1
]}

GUDENAU, HW ^{[1
]}

KEMPER, GM ^{[1
]}

STERCKEN, K ^{[1
]}

机构：

[1] RHEIN WESTFAL TH AACHEN,INST EISENHUTTENKUNDE,W-5100 AACHEN,GERMANY

来源：

STAHL UND EISEN | 1993年 / 113卷 / 09期

关键词：

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Analysis of the relative speeds between strand and mould. Presentation of a tribologic model which describes the different variations of the frictional forces between strand and mould in billet continuous casting with oil lubrication. Effect of steel grade, casting rate, mould oscillation frequency and mould oscillation stroke on the frictional forces. Reduction of the maximum and alternating shell load at mould oscillation without negative strip time. Optimization of the frictional force variation through combined low stressing of the strand shell, high-temperature strength of the steel grade and adequate heat transport from the casting strand.

引用

页码：93 / 99

页数：7

共 50 条

[1] INVESTIGATION OF FRICTION FORCES BETWEEN STRAND AND MOLD IN CONTINUOUS-CASTING OF STEEL
BROVMAN, MY
[J]. STEEL IN THE USSR, 1988, 18 (10): : 474 - 475
[2] MOLD STRAND INTERACTION IN CONTINUOUS-CASTING OF STEEL BILLETS .3. MOLD HEAT-TRANSFER AND TAPER
CHANDRA, S
BRIMACOMBE, JK
SAMARASEKERA, IV
[J]. IRONMAKING & STEELMAKING, 1993, 20 (02) : 104 - 112
[3] MOLD STRAND INTERACTION IN CONTINUOUS-CASTING OF STEEL BILLETS .1. INDUSTRIAL TRIALS
BAKSHI, IA
BRENDZY, JL
WALKER, N
CHANDRA, S
SAMARASEKERA, IV
BRIMACOMBE, JK
[J]. IRONMAKING & STEELMAKING, 1993, 20 (01) : 54 - 62
[4] MONITORING THE LUBRICATION IN THE MOLD DURING CONTINUOUS-CASTING OF STEEL
MAIRY, B
RAMELOT, D
DAUBY, P
[J]. STAHL UND EISEN, 1979, 99 (14): : 737 - 745
[5] FRICTION BETWEEN MOLD AND STRAND IN CONTINUOUS-CASTING OF SLAB
OHMIYA, S
NAKATO, M
HABU, Y
EMI, T
HAMAGAMI, K
BADA, H
FUKUHARA, Y
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1983, 23 (03) : B85 - B85
[6] MONITORING DEVICE OF MOLD LUBRICATION DURING CONTINUOUS-CASTING OF STEEL
不详
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (11) : 1011 - 1011
[7] HEAT-TRANSFER BETWEEN MOLD AND STRAND THROUGH MOLD FLUX FILM IN CONTINUOUS-CASTING OF STEEL
YAMAUCHI, A
SORIMACHI, K
SAKURAYA, T
FUJII, T
[J]. ISIJ INTERNATIONAL, 1993, 33 (01) : 140 - 147
[8] POWER ULTRASONICS EXCITATION OF A MOLD IN A CONTINUOUS-CASTING MACHINE OF STEEL BILLETS
NOGUES, M
BEAUD, C
[J]. ULTRASONICS, 1987, 25 (06) : 352 - 352
[9] EMPOWERMENT WITH KNOWLEDGE - TOWARD THE INTELLIGENT MOLD FOR THE CONTINUOUS-CASTING OF STEEL BILLETS
BRIMACOMBE, JK
[J]. METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1993, 24 (06): : 917 - 935
[10] MATHEMATICAL-ANALYSIS OF THE LUBRICATION BETWEEN MOLD AND SHELL FOR CONTINUOUS-CASTING
ANZAI, E
SIGEZUMI, T
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (03) : B97 - B97

← 1 2 3 4 5 →