An assessment of the production of fine material in iron ore sinter

被引:6
|
作者
van den Berg, T. [1 ]
de Villiers, J. [1 ]
机构
[1] Univ Pretoria, Dept Mat Sci & Met Engn, ZA-2000 Pretoria, South Africa
关键词
Iron ore sinter; SFCA; Haematite; Magnetite;
D O I
10.1179/174328509X455313
中图分类号
TD [矿业工程];
学科分类号
0819 ;
摘要
Iron ore sinter is produced from fine grained ore in order to provide a direct charge to the blast furnace. During the sinter production process, fine sinter is produced that is not acceptable as feedstock for the blast furnace. The aim of this study is to compare the composition and phase chemistry of the fine and normal sinter to determine if chemical or operational changes can be made to reduce the amount of fine sinter formed. This will be achieved through the analysis of real industrial sinter samples and sinter test pot samples. It has been concluded that the production of fine sinter is a direct function of the amount of haematite present in the sinter. Suggestions to decrease the amount of fine sinter formed include: uniform heat distribution during ignition, pO(2) alteration by reductant addition, lower ignition temperature, regulating the cooling regime and decreasing the grain size of lime.
引用
收藏
页码:214 / 221
页数:8
相关论文
共 50 条
  • [1] Operational and environmental assessment on the use of charcoal in iron ore sinter production
    Abreu, Guilherme Correa
    de Carvalho, Joao Andrade, Jr.
    Correa da Silva, Bernardo Enne
    Pedrini, Rinaldo Henrique
    JOURNAL OF CLEANER PRODUCTION, 2015, 101 : 387 - 394
  • [2] Study of iron ore sinter when fine ore is replaced with coarse ore, using infrared furnace and sinter pot tests
    Nyembwe, A. M.
    Garbers-Craig, A. M.
    IRONMAKING & STEELMAKING, 2014, 41 (03) : 173 - 181
  • [3] Practice of production of quality sinter from fine hematite ore
    Chen, Ping
    Wang, Changqiu
    Wu, Keng
    Feng, Baoze
    Wang, Tao
    Kang T'ieh/Iron and Steel (Peking), 2004, 39 (05):
  • [5] Iron Ore Granulation for Sinter Production: Developments, Progress, and Challenges
    Niu, Lele
    Zhang, Jianliang
    Wang, Yaozu
    Kang, Jian
    Li, Sida
    Shan, Changdong
    Li, Zhen
    Liu, Zhengjian
    ISIJ INTERNATIONAL, 2023, 63 (04) : 601 - 612
  • [6] HARMFUL ADMIXTURES ASSESSMENT IN SINTER MIXTURES USED IN IRON ORE SINTER PLANTS IN POLAND
    Korol, J.
    Burchart-Korol, D.
    Smolinski, A.
    METALURGIJA, 2014, 53 (04): : 559 - 562
  • [7] Iron-ore sinter
    Schwartz, GM
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1929, 84 : 39 - 66
  • [8] COMMERCIAL PRODUCTION OF IRON-ORE AGGLOMERATES USING SINTER FEEDS CONTAINING A LARGE AMOUNT OF FINE ORES
    NIWA, Y
    SAKAMOTO, N
    KOMATSU, O
    NODA, H
    KUMASAKA, A
    ISIJ INTERNATIONAL, 1993, 33 (04) : 454 - 461
  • [9] More reliable control and monitoring in the production of iron-ore sinter
    Endiyarov S.V.
    Petrushenko S.Y.
    Omel’chenko S.V.
    Steel in Translation, 2015, 45 (4) : 266 - 269
  • [10] Research of the production of iron ore sinter from bauxite processing waste
    Zhunussova, A. K.
    Bykov, P. O.
    Zhunusov, A. K.
    Kenzhebekova, A. Ye.
    KOMPLEKSNOE ISPOLZOVANIE MINERALNOGO SYRA, 2024, (02): : 73 - 81