Electroluminescent Properties of Organic Light-emitting Diodes with Hole-injection Layer of CuPc

Emission properties of the organic light-emitting diodes were investigated with the use of a hole-injection layer of copper(II)-phthalocyanine (CuPc). The manufactured device structure is indium-tin-oxide (ITO) (180 nm)/CuPc (0 similar to 50 nm)/ N,N'-Bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) (40 nm)/ tris-(8-hydroxyquinoline) aluminum (III) (Alq(3)) (60 nm)/ Al(100 nm). We investigated the luminescence properties of Alq3 which is affected by the CuPc hole- injection layer. Also, we studied the influence of light-emission properties in the structure of an ITO/CuPc/TPD/Alq(3)/Al device depending on the several thicknesses of CuPc (0 similar to 50 nm) layer. As a result, it was found that the hole injection occurs smoothly in the device with 20 nm thick CuPc layer, and the properties become significantly worse in the device with a CuPc layer thickness higher than 40 nm. We studied the topography and external quantum efficiency depending on the layer thickness of CuPc. Also, we analyzed the electroluminescent characteristics in the low and high-voltage range.