Synthesis and characterization of nanocrystalline spinel Zinc ferrite prepared by sol-gel auto-combustion technique

被引：20

作者：

Khorrami, S. ^{[1
]}

Gharib, F. ^{[2
]}

Mahmoudzadeh, G. ^{[1
]}

Sepehr, S. Sadat ^{[1
]}

Madani, S. Sadat ^{[1
]}

Naderfar, N. ^{[1
]}

Manie, S. ^{[1
]}

机构：

[1] Islamic Azad Univ, Dept Chem, North Tehran Branch, Tehran, Iran

[2] Shahid Beheshti Univ, Dept Chem, Tehran, Iran

来源：

INTERNATIONAL JOURNAL OF NANO DIMENSION | 2011年 / 1卷 / 03期

关键词：

Sol-gel auto-combustion; Nanocrystalline; ZnFe2O4; X-ray diffraction; Scanning electron microscopy;

D O I：

10.7508/ijnd.2010.03.005

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Sol-gel auto-combustion is a unique combination of the combustion and the chemical gelation processes. In this work, nanosize (d) powders with compositions of ZnFe2O4 were synthesized by sol-gel combustion method. The puffy, porous brown powders as-combusted was calcined at the temperature of 750-1000 degrees C for 4 h. These powders are characterized by X-ray diffraction and scanning electron microscopy. Particle size and morphology of nanocrystalline were determined by XRD and SEM, respectively. The average particle size was estimated about 17 nm for calcined powders. Surface area for zinc ferrite synthesized by this method is 36 m(2)/g.

引用

页码：221 / 224

页数：4

共 50 条

[1] Sol-gel auto-combustion synthesis of spinel-type ferrite nanomaterials
Andris Sutka
Gundars Mezinskis
[J]. Frontiers of Materials Science, 2012, 6 : 128 - 141
[2] Sol-gel auto-combustion synthesis of spinel-type ferrite nanomaterials
Sutka, Andris
Mezinskis, Gundars
[J]. FRONTIERS OF MATERIALS SCIENCE, 2012, 6 (02) : 128 - 141
[3] Synthesis of nanocrystalline NiCuZn ferrite powders by sol-gel auto-combustion method
Yue, ZX
Zhou, J
Li, LT
Zhang, HG
Gui, ZL
[J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 208 (1-2) : 55 - 60
[4] Sol-gel auto-combustion synthesis of zinc ferrite for moderate temperature desulfurization
Zhang, Rongiun
Huang, Jiejie
Zhao, Hantao
Sun, Zhiqiang
Wang, Yang
[J]. ENERGY & FUELS, 2007, 21 (05) : 2682 - 2687
[5] Characterization of nanocrystalline NiCuZn ferrite powders synthesized by sol-gel auto-combustion method
Roy, P. K.
Bera, J.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 197 (1-3) : 279 - 283
[6] SYNTHESIS OF THE NANOCRYSTALLINE NICKEL FERRITE BY A NOVEL MECHANO SOL-GEL AUTO-COMBUSTION METHOD
Shahmirzaei, M.
Ebrahimi, S. A. Seyyed
Dehghan, R.
[J]. MODERN PHYSICS LETTERS B, 2011, 25 (11): : 855 - 861
[7] Synthesis, characterization and magnetic properties of cobalt ferrite nanoparticles prepared by glycine assisted sol-gel auto-combustion technique
Shinde, A. B.
Kale, G. H.
Dhage, V. N.
Gaikwad, P. K.
Jadhav, K. M.
[J]. ADVANCES IN MATERIALS SCIENCE AND TECHNOLOGY (AMST), 2014, 209 : 31 - +
[8] Characterization and preparation of nanocrystalline MgCuZn ferrite powders synthesized by sol-gel auto-combustion method
Barati, M. R.
[J]. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2009, 52 (02) : 171 - 178
[9] Influence of zinc substitution on magnetic and electrical properties of MgCuZn ferrite nanocrystalline powders prepared by sol-gel, auto-combustion method
Barati, M. R.
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 478 (1-2) : 375 - 380
[10] Synthesis and characterization of cobalt substituted zinc ferri-chromites prepared by sol-gel auto-combustion method
Hankare, P. P.
Vader, V. T.
Sankpal, U. B.
Patil, R. P.
Jadhav, A. V.
Mulla, I. S.
[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2011, 22 (08) : 1109 - 1115

← 1 2 3 4 5 →