NUMERICAL PREDICTION OF 3-DIMENSIONAL FIBER ORIENTATION IN HELE-SHAW FLOWS

A numerical technique is developed to determine the three‐dimensional fiber orientation in complex flows. The fiber orientation state is specified in terms of orientation tensors, which are used in several constitutive models. This method is applied to quasi‐steady state Hele‐Shaw flows in order to predict the flow‐induced fiber orientation during injection molding at zero volume fraction limit. At the inlet, a number of fibers are introduced at a specified rate into the flow and each fiber location is traced during the mold filling. Along these determined paths, the independent components of fourth order orientation tensors are solved, describing the orientation state. The numerical grid generation technique, which is suitable for complex mold shapes, is employed for the flow solution. Orientation ellipsoids are calculated from the second order tensors and are used to present the fiber orientation results. The numerical solutions are obtained for channel and converging flows. Planar, longitudinal, and transverse orientation results are generated from the orthogonal projections of the orientation ellipsoids. Copyright © 1990 Society of Plastics Engineers