High cycle torsional fatigue properties of 17-4PH stainless steel

被引：1
|
作者：
Yanase, K. [1 ]
Shoenbauer, B. M. [2 ]
Endo, M. [1 ]
机构：
[1] Fukuoka Univ, Fukuoka, Japan
[2] Univ Nat Resources & Life Sci BOKU, Vienna, Austria
来源：
FRATTURA ED INTEGRITA STRUTTURALE | 2016年 / 10卷 / 37期
关键词：
17-4PH; Small defect; Torsion; Biaxial fatigue; Fatigue limit;
D O I：
10.3221/IGF-ESIS.37.14
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Sensitivity to small defects under torsional fatigue loading condition is examined in the high cycle fatigue regime. Fatigue crack initiation and small crack growth behaviors were observed during fatigue testing and fractographic investigations were performed. The results are compared to the data obtained in the uniaxial fatigue tests, which allows the effect of biaxial stresses on the surface of material to be discussed. Finally, an approach for predicting the fatigue limit of 17-4PH stainless steel under torsional and tension-compression fatigue loadings is presented.
引用
收藏
页码：101 / 107
页数：7
相关论文
共 50 条
  • [1] Effect of microstructure and cycling frequency on the torsional fatigue properties of 17-4PH stainless steel
    Schonbauer, B. M.
    Yanase, K.
    Chehrehrazi, M.
    Endo, M.
    Mayer, H.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 801 (801):
  • [2] Influences of small defects on torsional fatigue limit of 17-4PH stainless steel
    Schoenbauer, B. M.
    Yanase, K.
    Endo, M.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2017, 100 : 540 - 548
  • [3] Influence of small defects on the uniaxial and torsional fatigue strength of 17-4PH stainless steel
    Schoenbauer, B. M.
    Mayer, H.
    Yanase, K.
    Endo, M.
    [J]. 3RD INTERNATIONAL SYMPOSIUM ON FATIGUE DESIGN AND MATERIAL DEFECTS (FDMD 2017), 2017, 7 : 492 - 496
  • [4] Effect of Shot Peening on Fatigue Properties of 17-4PH Stainless Steel at Room Temperature and High Temperature
    喷丸强化对17-4PH不锈钢室温及高温疲劳性能的影响
    [J]. Liu, Mingxia (liumingxia1121@163.com), 1600, Cailiao Daobaoshe/ Materials Review (34): : 22124 - 22129
  • [5] VHCF properties and fatigue limit prediction of precipitation hardened 17-4PH stainless steel
    Schoenbauer, Bernd M.
    Yanase, Keiji
    Endo, Masahiro
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2016, 88 : 205 - 216
  • [6] Mechanical properties of 17-4PH stainless steel foam panels
    Raj, S. V.
    Ghosn, L. J.
    Lerch, B. A.
    Hebsur, M.
    Cosgriff, L. M.
    Fedor, J.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 456 (1-2): : 305 - 316
  • [7] PROPERTIES OF 17-4PH STEEL
    JUDY, RW
    FUJII, CT
    GOODE, RJ
    [J]. REPORT OF NRL PROGRESS, 1973, (NOV): : 47 - 48
  • [8] Study on MIM of high strength stainless steel 17-4PH
    Gu, Hu
    Bi, Jingwei
    Li, Zheng
    Ma, Yuanfei
    Cao, Yongjia
    [J]. Fenmo Yejin Jishu/Powder Metallurgy Technology, 2006, 24 (05): : 336 - 339
  • [9] Study on high-cycle fatigue behavior of laser-cladding Stellite6 on 17-4PH stainless steel
    Zhao, Wenyu
    Lu, Fenggui
    Li, Zhuguo
    Wang, Dong
    Wang, Xiaojuan
    Liu, Xia
    Yang, Renjie
    [J]. Zhao, Wenyu, 1600, Science Press (41):
  • [10] Effect of hydrogen on very high cycle fatigue properties of 17-4 PH martensite stainless steel
    Zheng, Ying
    Sun, Huili
    Yan, Luchun
    Pang, Xiaolu
    Gao, Kewei
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2023, 174
12345