BIOMECHANICAL REMODELING OF BIODEGRADABLE SMALL-DIAMETER VASCULAR GRAFTS IN SITU

Aim: to evaluate the biomechanical remodeling of polymer grafts modified with vascular endothelial growth factor (VEGF) after implantation into rat abdominal aorta. Materials and methods. Vascular grafts of 2 mm diameter were fabricated by electrospinning from polycaprolactone (PCL) and a mixture of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) and PCL. The grafts were modified with VEGF by biphasic electrospinning. Morphology of the grafts was assessed by scanning electron microscopy. Physico-mechanical properties of PCL and PHBV/PCL grafts were estimated using uniaxial tensile test and physiological circulating system equipped with state-of-the-art ultrasound vascular wall tracking system. Physico-mechanical testing of PCL/VEGF and PHBV/PCL/VEGF was performed before and after implantation into rat abdominal aorta for 6 months. The modeling of coronary artery bypass grafting (CABG) was performed by finite element analysis for modified grafts. Results. Durability of PCL and PHBV/PCL grafts did not differ from that of human internal mammary artery; however, elasticity and stiffness of these grafts were higher compared to internal mammary artery. Viscoelastic properties of the grafts were comparable to those of native blood vessels. Modification of the grafts with VEGF reduced material stiffness. Six months postimplantation, PCL/VEGF and PHBV/PCL/VEGF were integrated with aortic tissue that induced changes in the physico-mechanical properties of the grafts similar to the native vessel. Biomechanical modeling confirmed the functioning of modified grafts in bypass position for CABG. Conclusion. PCL/VEGF and PHBV/PCL/VEGF grafts have satisfactory physico-mechanical properties and can be potentially used in the reconstruction of blood vessels.