MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR WELDED AlMg4.5Mn ALLOY

被引：0
|
作者：
Klobcar, Damjan [1 ]
Kosec, Ladislav [2 ]
Pepelnjak, Tomaz [1 ]
Tusek, Janez [1 ]
机构：
[1] Univ Ljubljana, Fac Mech Engn, Askerceva 6, Ljubljana 1000, Slovenia
[2] Univ Ljubljana, Fac Nat Sci & Engn, Ljubljana 1000, Slovenia
来源：
ENGINEERING REVIEW | 2012年 / 32卷 / 02期
关键词：
friction stir welding; AlMg4.5Mn; welding parameters; mechanical properties; weld failures;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A comprehensive research of Friction Stir Welding of 4 mm thick sheet aluminium alloy (AlMg4.5Mn) for forming was done. A vast variety of process parameters was tested according to the plan of experiments at constant 2 tilt angle. Specially designed tensile test specimens were sectioned perpendicularly to the welding direction. The microstructure was prepared for the observation on a light microscope under the polarized light source. Vickers micro-hardness was measured. The results show the influence of FSW process parameters on the formation of the microstructure and mechanical properties.
引用
收藏
页码：104 / 110
页数：7
相关论文
共 50 条
  • [1] POROSITY OF WELDED JOINTS OF AlMg4.5Mn ALLOY
    Kastelec-Macura, Sandra
    Prokic-Cvetkovic, Radica
    Jovicic, Radomir
    Popovic, Olivera
    Burzic, Meri
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2008, 8 (02): : 114 - 120
  • [2] MECHANICAL AND FRACTURE MECHANICAL-PROPERTIES OF A WELDED JOINT FROM ALMG4.5MN
    PUSCH, G
    HOHNE, V
    BOSEL, D
    NEUE HUTTE, 1987, 32 (12): : 453 - 456
  • [3] CRACKING RESISTANCE OF AlMg4.5Mn ALLOY TIG WELDED JOINTS
    Jovicic, Radomir
    Sedmak, Aleksandar
    Prokic-Cvetkovic, Radica
    Bulatovic, Srdjan
    Buyukyildirim, Galip
    STRUCTURAL INTEGRITY AND LIFE-INTEGRITET I VEK KONSTRUKCIJA, 2011, 11 (03): : 205 - 208
  • [4] Structure and mechanical properties of AlMg4.5 and AlMg4.5Mn wires extruded by KoBo method
    1600, Committee of Metallurgy (59):
  • [5] PLASTIC INSTABILITIES IN AlMg4.5Mn ALLOY SHEET
    Molnarova, Orsolya
    Dobron, Patrik
    Chmelik, Frantisek
    METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, : 1551 - 1555
  • [6] STRUCTURE AND MECHANICAL PROPERTIES OF AlMg4.5 AND AlMg4.5Mn WIRES EXTRUDED BY KoBo METHOD
    Jaskowski, M.
    Piela, K.
    Blaz, L.
    ARCHIVES OF METALLURGY AND MATERIALS, 2014, 59 (02) : 473 - 479
  • [7] THE MICROSTRUCTURE OF MG MODIFIED BY SURFACE ALLOYING WITH AN ALMG4.5MN WIRE
    Mola, Renata
    Bucki, Tomasz
    Dziadon, Andrzej
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1582 - 1587
  • [8] Investigation of Ultrasonic Assisted Milling of Aluminum Alloy AlMg4.5Mn
    Kuruc, Marcel
    Marek, Zvoncan
    Peterka, Jozef
    24TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2013, 2014, 69 : 1048 - 1053
  • [9] STABILITY OF WELDED PROBES OF ALMG4.5MN RELATIVE TO STRESS CRACK CORROSION
    WEIDEMAN.L
    ZEIGER, H
    CHEMIE INGENIEUR TECHNIK, 1969, 41 (20) : 1138 - &
  • [10] The Microstructure, Texture and Mechanical Properties of Friction Stir Welded Aluminum Alloy
    Mouloud Saliha Gachi
    Thierry Aissani
    Anne.Laure Baudin
    François Helbert
    Sébastien Brisset
    Marie-Hélène Gautrot
    Djamel Mathon
    Fouad Bradai
    Russian Journal of Non-Ferrous Metals, 2020, 61 : 523 - 533
12345